Nanogels: Recent Advances in Synthesis and Biomedical Applications

Pasquale Mastella

Biagio Todaro

Biagio Todaro

3 and

Stefano Luin

Stefano Luin

NEST Laboratory, Scuola Normale Superiore, Piazza San Silvestro 12, 56127 Pisa, Italy

Fondazione Pisana per la Scienza ONLUS, Via Ferruccio Giovannini 13, 56017 San Giuliano Terme, PI, Italy

Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, 3001 Leuven, Belgium NEST Laboratory, Istituto Nanoscienze-CNR, Piazza San Silvestro 12, 56127 Pisa, Italy Authors to whom correspondence should be addressed. Nanomaterials 2024, 14(15), 1300; https://doi.org/10.3390/nano14151300

Submission received: 8 July 2024 / Revised: 27 July 2024 / Accepted: 30 July 2024 / Published: 1 August 2024

Abstract

In the context of advanced nanomaterials research, nanogels (NGs) have recently gained broad attention for their versatility and promising biomedical applications. To date, a significant number of NGs have been developed to meet the growing demands in various fields of biomedical research. Summarizing preparation methods, physicochemical and biological properties, and recent applications of NGs may be useful to help explore new directions for their development. This article presents a comprehensive overview of the latest NG synthesis methodologies, highlighting advances in formulation with different types of hydrophilic or amphiphilic polymers. It also underlines recent biomedical applications of NGs in drug delivery and imaging, with a short section dedicated to biosafety considerations of these innovative nanomaterials. In conclusion, this article summarizes recent innovations in NG synthesis and their numerous applications, highlighting their considerable potential in the biomedical field.

1. Introduction

Recent advancements in nanomedicine have led to the development of nanogels (NGs) for drug delivery, gene therapy, and nanotheranostics [1,2,3]. NGs are polymeric nanomaterials that possess the advantages of both hydrogels and nanoparticles (NPs). Indeed, both hydrogels [4] and NGs are polymeric materials with a three-dimensional crosslinked structure (at the nanometer level) able to retain large amounts of water or other fluids without dissolving; they are often biocompatible, being therefore suitable for biomedical applications. Hydrogels can vary widely in size, from a few micrometers to several centimeters, and are used in a wide range of applications, such as medical devices, cosmetics, tissue engineering, and bandages. Their structure can be molded into various shapes to suit different needs. On the other side, NGs are characterized by their sizes between a few and a few hundred nanometers, which facilitate specific interactions at the cellular and tissue level. Moreover, like NPs, the functionalization of their surfaces allows linking various moieties at high densities (because of the high surface-to-volume ratio of nanoparticles); this can be used, e.g., for targeted delivery and/or for modulating the protein corona in biofluids [5]. Due to their inherent porosity, NGs can encapsulate both hydrophilic and lipophilic payloads very efficiently, protecting them from rapid renal clearance and from degradation (e.g., by hydrolysis or enzymatic degradation) during storage or when within biofluids, therefore increasing their shelf and circulation half-lives. Finally, they can be made responsive to specific external stimuli such as pH, temperature, or specific molecules by exhibiting changes in the gel volume and water content (“swelling”), colloidal stability, mechanical strength, and/or other physical/chemical properties [6]; this enables the controlled and precise release of drugs or other theranostic molecules. For all these reasons, NGs are often applied in advanced applications, such as targeted drug delivery, biomedical imaging, and diagnostics. However, NGs share with nanoparticles a relatively low translation: e.g., despite extensive research in the last decades, only 15 nanoparticle-based pharmaceuticals for cancer treatment are currently on the market [7]. The bottlenecks in NP translation include limited scalability, poor control over reaction parameters, extensive NP polydispersity, unsatisfactory batch-to-batch reproducibility, and large volumes of chemical reagents used, including drugs. These issues affect encapsulation efficiency and release profiles, hindering optimal treatment performance [8]. Furthermore, NGs usually suffer from low mechanical and biological stability under physiological conditions, also due to physical interactions, since they are often “softer” than other kinds of NPs.

Nanogels can be composed of a variety of natural or synthetic polymers based on their specific applications and desired properties. Natural polymers include, e.g.: (i) chitosan, derived from chitin, known for its biocompatibility, biodegradability, and antimicrobial properties; (ii) alginate, extracted from algae, valued for its ability to form gels in the presence of divalent ions such as calcium; (iii) hyaluronic acid, a natural component of the extracellular matrix, chosen for its capacity to retain water very efficiently; and (iv) polysaccharides, like in natural gums [9]. Natural polymers can also be chemically modified (see [9] for some examples), as also discussed in Section 2. Among synthetic polymers, polyacrylamide is used for its ability to form strong gels and for the ease of derivatization due to the presence of the amine group, while poly(2-hydroxyethyl methacrylate) (Poly(2-HEMA)), known for its biocompatibility and transparency, is often used in contact lenses and medical devices. Poly(N-isopropylacrylamide) (PNIPAM) is a thermoresponsive polymer useful for controlled drug release, featuring a low critical solution temperature (LCST) of around 32 °C in water; it forms temperature-sensitive gels that swell or shrink in response to temperature changes. Polyvinyl alcohol (PVA), chosen for its biocompatibility and solubility in water, forms tough films and gels [10], while poly(ethylene glycol) (PEG) is used to improve biocompatibility and reduce the immunogenicity of NGs. Polyglutamic acid (PGA), a biodegradable and biocompatible polymer, is utilized for its ability to enhance the stability and drug-loading capacity of NGs [11]. Table 1 shows the advantages and disadvantages of the natural and synthetic polymers mentioned in this review. In previous reviews, NGs have been classified according to their polymeric components [12], the types of bonds involved in forming the polymer network or its organization [13,14], their stimulus-responsive capabilities [15], routes of administration [16], and applications [17].

In this review, we will primarily concentrate on the synthesis methods of NGs, emphasizing their strengths and weaknesses. We will also describe synthesis protocols based on flow chemistry, especially microfluidics, as this can help address some of the bottlenecks for NP translation in clinics, as mentioned above. In addition, we will illustrate the various applications of NGs in different fields while also providing a brief analysis of possible challenges for clinical translation (Figure 1). Focusing mostly on relevant research from the past five years, this review aims to provide a thorough examination of the topic, highlighting current challenges and offering insights for researchers to overcome them.

2. Batch Synthesis

In the last several years, various techniques for NG production have been developed. NGs can be made via simultaneous or sequential polymerization and crosslinking, depending on the starting ingredients. There are numerous techniques for their synthesis, such as ionic gelation, emulsion polymerization, precipitation polymerization, inverse nanoprecipitation, self-assembly, and (micro)template-assisted polymerization [18,19]. For NGs, many polymerization processes can take place in an aqueous environment, thanks to the water solubility of most of the monomers and crosslinking agents used for the formation of NGs.

Precipitation polymerization and reverse emulsion polymerization are the most widely used techniques based on simultaneous crosslinking and polymerization for creating NGs. Precipitation polymerization is a method in which soluble monomers are polymerized in a solvent in which the resulting polymer is insoluble. This process results in the formation of polymer nanoparticles or NGs through several key steps. Initially, the (multifunctional) monomers and a crosslinking agent are dissolved in a suitable solvent. Polymerization is then initiated, usually by a thermal or chemical initiator that leads to the formation of free radicals. These radicals initiate polymerization of the monomers, and the crosslinking agent creates bonds between the polymer chains, leading to the formation of a three-dimensional network. As polymerization proceeds, the growing polymer chains become insoluble in the solvent and precipitate, forming NGs. The size and structure of the NGs can be controlled by adjusting monomer concentration, amount of crosslinking agent, and polymerization conditions, such as temperature and time; in particular, controlled radical polymerization techniques, such as atom transfer radical polymerization (ATRP) and reversible addition–fragmentation chain transfer polymerization (RAFT), can slow the reaction rate to promote the formation of uniform particles [17,19,20]. For instance, Ribovski et al. [21] used precipitation polymerization to produce fluorescently tagged PNIPAM NGs, with the degree of polymer crosslinking determining the NG hardness. In another example, Kusmus et al. [19] outlined the development of versatile epoxide-functional precursor NGs via controlled crosslinking polymerization; in a subsequent post-formation step, the epoxide moieties were functionalized with amines, azides, or thiols, as well as hydrolyzed to the corresponding diols.

Nanogels can also be synthesized using suitable emulsification techniques with an oil-soluble emulsifier. Reverse emulsion polymerization, also known as water–oil emulsion polymerization, entails the dispersion of an aqueous phase containing monomers and a crosslinking agent in a continuous oil (or organic) phase immiscible with water, with the aid of a surfactant. Polymerization takes place within the dispersed water droplets, with the monomers reacting to form crosslinked polymer chains, resulting in the formation of NGs [22]. The concentration of monomers and crosslinkers, the pH of the reaction medium, the choice of surfactant, and other parameters substantially impact the size of the NGs formed during reverse emulsion polymerization. The drawbacks of this method include the use of an organic solvent as the reaction medium and the difficulty in purifying the resulting NGs due to the presence of emulsifiers and co-emulsifiers.

While the simultaneous approach is widely adopted, NGs can alternatively be synthesized through two sequential steps: polymerization and crosslinking. This sequential approach offers enhanced control over NG properties and functionalities, a topic that will be explored further in subsequent sections. In terms of post-polymerization crosslinking, NGs are categorized into chemically crosslinked or physically self-assembled types; the first type relies on covalent bonds among different polymers, while the second relies on non-covalent interactions among them. However, many NGs incorporate both chemical and physical connections in their formation. Thus, this section will elaborate on these interactions and showcase examples of NGs created through these mechanisms. In Table 2, we schematically compare the advantages and disadvantages of the two types of syntheses, which will be discussed in more detail below. These different synthesis techniques provide versatile tools for tailoring NGs with specific properties, making them highly adaptable for applications in drug delivery, diagnostics, and tissue engineering within the biomedical field.

2.1. Physical Methods

Physical methods for the synthesis of gels and NGs rely on spontaneous interactions and arrangements of their components, resulting in rationalized self-assembled and self-organized supramolecular structures without covalent bonds. Despite having lower mechanical strength than covalently bonded systems, the physically constructed NGs can be preferred because they do not require additional crosslinking agents or polymerization initiators, improving their safety and biocompatibility. The primary forces driving the formation of these entangled polymeric materials are often called host–guest interactions and can include hydrogen bonds, electrostatic interactions, van der Waals forces, π−π stacking (interactions among aromatic rings), and hydrophobic interactions.

2.1.1. Electrostatic Interactions

NGs based on electrostatic interactions are created by the attraction between molecules with opposite charges, which drives their self-assembly and stability. These structures are typically constructed using polymers containing ionizable or ionic functional groups, such as carboxylates, amines, or quaternary ammonium ions. Polymers commonly used to create NGs through electrostatic interactions include chitosan [23], alginate [24], hyaluronic acid (HA) [25], and poly(glutamic acid) (PGA) [26]. The synthesis of NGs by physical crosslinking involves a simple and efficient procedure, usually conducted in an aqueous environment where the polymer chains are completely solvated and initially not strongly interacting. When conditions are changed, e.g., by changing temperature, pH, or ionic strength, the polymer chains begin to interact and form crosslinks. For example, pH adjustment can protonate or deprotonate certain polymer functional groups, causing them to attract each other and form ionic crosslinks. Another type of synthesis relying on electrostatic interaction is ionic gelation, based on the use of polyelectrolytes forming crosslinks in the presence of ions; it is a simple and rapid synthesis, but it is difficult to control given the very rapid assembly of polymers and crosslinkers, causing inter-batch variations in physicochemical properties such as particle size, polydispersity, surface charge, and drug release profiles.

In general, electrostatic interactions cause the polymer chains to organize themselves into a nanoscale gel structure, effectively trapping water within the network. This straightforwardness not only simplifies production but also makes the resulting NGs ideal structures for biomedical applications, with reduced risk of toxic effects and an improved biological safety profile due to their synthesis without chemical crosslinking, which often requires non-biocompatible crosslinkers. One of the remarkable advantages of physically crosslinked NGs is their adjustable size, precisely controlled by changing parameters such as polymer concentration, ionic strength, temperature, and pH during synthesis [27]. This tuning is crucial for adapting the properties of NGs to the requirements of specific applications, such as drug delivery or tissue engineering. Furthermore, the ability to modulate the size of NGs allows for optimizing their pharmacokinetic profiles, cellular uptake, and in vivo biodistribution. The electrostatically driven formation of NGs allows the precise encapsulation of charged or polar drugs or biomolecules, which interact with the charged groups in the NG components. This versatile system finds applications in encapsulating chemotherapeutic agents for improved treatment efficacy [28] and more generally, in theranostics [29], where nanoparticles are formulated for simultaneous therapy and diagnostics. An example of the synthesis of a drug-containing NG where electrostatic self-assembly is involved is reported in Figure 2.

2.1.2. Hydrophobic Interactions in Amphiphilic Nanogels

Polymers composed of hydrophobic and hydrophilic parts are called amphiphilic and can be used in the generation of amphiphilic NGs. The synthesis of amphiphilic NGs involves the dissolution of amphiphilic polymers in an aqueous solution, in which the hydrophilic segments preferentially interact with water, and the hydrophobic segments tend to avoid it. By changing environmental conditions, such as temperature, pH, or ionic strength, the polymers self-assemble, with the hydrophobic parts aggregating. Possible structures for these kinds of nanoparticles are a hydrophobic core surrounded by a shell of hydrophilic segments or more hydrophobic nanodomains in a hydrophilic matrix. Amphiphilic NGs possess the capacity to swell in aqueous and organic media due to the mixture of hydrophilic and hydrophobic compounds. However, they exhibit a lower propensity to swell in water than NGs consisting exclusively of hydrophilic polymers, ensuring, therefore, superior mechanical properties. In addition, they offer greater thermophysical and structural stability. In this formulation, the fundamental characteristics of the colloidal structure are driven by the primary structure of the polymer, including its composition, molecular weight, and branching. The type and abundance of hydrophobic groups along the polymer chains, which act as physical bonds, are particularly important, thus defining the network formation in the NG structure [30]. Moreover, this formulation facilitates the encapsulation of poorly water-soluble payloads; the cargo-loading capacity and release kinetics are set by the interaction between the hydrophobic cargo and the hydrophobic nanodomains [31]. In addition, the flexible hydrophilic matrix allows for control of the mechanical properties of the NGs and reduces the potential toxic effects of the hydrophobic groups. The control of these interactions can be achieved by varying the type and content of hydrophobic side groups on the polymer. This allows fine-tuned regulation over the loading and release profiles [32]. Consequently, the ability to finely tune the hydrophobicity of the NGs, or the hydrophilic/hydrophobic balance, will open new therapeutic options for various administration routes [33]. Furthermore, the amphiphilic structure offers the possibility to regulate and tailor their interactions with biological systems; for example, Bewersdorff et al. produced amphiphilic NGs with more or less idrophobic groups on their surface, and they were, therefore, able to control the protein corona formation and modulate interactions with biological barriers [34].

Even if the self-assembly strategy offers considerable versatility, counting exclusively on physical bonds can be restrictive. To overcome this limitation, reactive groups can be incorporated into amphiphilic copolymers, facilitating covalent crosslinking after the self-assembly process (Figure 3). This method stabilizes the properties of the nanoparticles, resulting in functional amphiphilic NGs whose network characteristics can be precisely controlled by a combination of hydrophobic physical interactions and covalent crosslinks. Covalent crosslinking of these self-assembled systems can be achieved through two main synthetic approaches. One incorporates all the necessary reactive groups directly into the amphiphilic copolymer. The other involves the reaction of the reactive copolymers with (bi)functional crosslinkers. These strategies, which employ crosslinking agents and chemical synthesis, will be discussed in detail in the following sections.

2.2. Chemical Methods

Covalent interactions in the synthesis of NGs can provide essential stability and functional properties. Various chemical reactions can be used to form these bonds, including free radical polymerization, click chemistry, disulfide bond formation, and carboxyl-amine reactions. Each of these reactions offers distinct advantages in terms of specificity, efficiency, and stability, helping to ensure the integrity and functionality of the network under physiological conditions.

2.2.1. Covalent Crosslinking Reaction

Nanogels formulated using covalent crosslinking have stable chemical bonds between polymer chains, forming a three-dimensional network that can retain water without dissolving. By selecting appropriate polymers and crosslinking agents, the properties of the NGs can be tailored for specific functionalities, such as pH sensitivity, temperature responsiveness, or redox responsiveness. The incorporation of various functional groups during the crosslinking process also enhances the versatility of chemically crosslinked NGs, making them suitable platforms for a wide range of biomedical applications. Both the choice of the starting materials and the particle formulation methods (e.g., microemulsion [36], precipitation) can be tailored to effectively shape and stabilize the NG three-dimensional structure. In a study by Tian et al. [37], the initial fabrication of an NG exploited a modified emulsion crosslinking technique: poly(ethylene glycol) diglycidyl ether acted as a long binding agent, linking hyaluronic acid (HA) chains within the emulsions to create a loose NG structure. Next, cystamine was introduced as an additional binding agent between HA chains via an EDC/NHS (1-ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-hydroxysuccinimide) reaction to create a more compact NG. In this way, the NGs became reactive to the glutathione (GSH), more abundant in a tumor environment and in particular in cell cytoplasm; GSH breaks the disulfide bridge in the cystamine, reverting the NGs to a loose structure with consequent release of the drug loaded within.

The formation of amide bonds used, e.g., for the reaction with cystamine mentioned above, is a common approach to chemical crosslinking; these bonds are typically formed from carboxyl and amine groups using carbodiimide chemistry or by generating activated esters. In the synthesis of NGs, amide bonds can serve a dual role. They can act as crosslinking points within the NG network, contributing to its structural integrity. Moreover, they can function as linkers that facilitate the conjugation of drug molecules or other bioactive compounds to the NG structure. Apart from amide bonds, numerous other chemical bonds can be used for crosslinking in NG synthesis. These include disulfide bonds, which will be discussed later, and ester bonds formed by hydroxyl and carboxyl groups.

2.2.2. Click Chemistry

Click chemistry (Figure 4) involves reactions commonly used for joining two molecular entities of choice with very high chemical yield towards a single product; click reactions are widely insensitive towards solvent parameters, oxygen, and possibly water, and happen in mild (e.g., physiological) conditions [38]. Typically, these reactions can occur in an aqueous environment, ensuring compatibility with sensitive biological components. Furthermore, when applicable, these reactions evolve according to a mechanism called regiospecificity, whereby one of the possible functional isomers is generated preferentially, if not exclusively. Click chemistry is widely used in NG synthesis due to its efficiency, specificity, and ability to form stable covalent bonds. This approach has significant advantages in NG production, including short reaction times, higher productivity, and improved purity. These characteristics make click chemistry an ideal method for tailoring NGs with precise control over their properties. Reactions such as azide–alkyne cycloaddition and thiol-ene reactions (Figure 4) are particularly useful for crosslinking polymer networks within NGs. Azide–alkynic cycloaddition, which includes variants such as Cu(I)-catalyzed (CuAAC) and strain-promoted (SPAAC) reactions, involves the covalent binding of azide and alkynic groups to create 1,2,3-triazole bonds [38] (Figure 4). CuAAC offers high specificity and fast kinetics under mild conditions; however, the application of CuAAC is somewhat limited by the potential cytotoxicity of copper ions and their ability to generate reactive oxygen species (ROS), which can damage biomolecules. Sometimes, it is possible to mitigate these effects by trying to thoroughly remove the copper ions upon purification of the products. Duro-Castano et al. optimized CuAAC coupling conditions in aqueous solution prior to the preparation of polyglutamic acid-based NGs to achieve higher crosslinking efficiency using the minimum amount of catalyst. Furthermore, they established washing protocols that used acidic conditions to protonate the carboxylic acid groups and thus hinder their complexation with the remaining copper ions [39] (Figure 5). Copper-free click reactions, including SPAAC, which utilize strained alkenes like dibenzocyclooctyne (DBCO), generally involve bioorthogonal cycloadditions, which allows them to take place within living systems without interfering with native biochemical processes and are, therefore, widely applied in NG synthesis due to their biocompatibility [40]. For example, Nagel et al. reported a peptide-crosslinked NG in which dendritic polyglycerol (dPG) modified with bicyclononyne groups (BCN) to form dPG-BCN was crosslinked by a matrix metalloproteinase (MMP)-sensitive peptide ligand modified with two azides [41]. Together with thiol-ene coupling, disulfide exchange reactions, and Michael reactions, which will be discussed in detail below, these reactions highlight their exceptional suitability for NG preparation.

2.2.3. Click-like Reactions

Other reactions included in the category of “click chemistry” are thiol-click-chemistry ones (Figure 4), which cover various thiol-based reactions, such as thiol−alkene and thiol−alkyne reactions, Michael addition, and disulfide exchange. Thiol-based reactions are advantageous due to their moderate orthogonality, allowing them to proceed in the presence of diverse functional groups without interference. They are highly reactive and easy to perform, typically under mild conditions, and generally produce high yields. Their efficiency, undemanding reaction conditions, and high specificity make them especially suitable for NG synthesis and other biomedical applications. In organosulfur chemistry, the thiol-ene reaction, also called alkene hydrothiolation, involves the reaction between a thiol (R-SH) and an alkene (R2C = CR2) to produce a thioether (R-S-R—note that “R” is a generic organic group, possibly different wherever it appears). Thiol-ene additions can occur through two mechanisms: free-radical additions and Michael-catalyzed additions. Free-radical additions can be triggered by light, heat, or radical initiators, which generate thiyl radicals, while thiol-ene–Michael addition is catalyzed by a base or a nucleophile.

Thiol-ene–Michael addition is a significant member of the “click” chemistry family and has many parallels with CuAAC and SPAAC reactions. However, a crucial difference is the natural presence of reactive groups. Azides and alkynes are absent in native biomolecules, allowing CuAAC to effectively functionalize only the particles in complex environments like the ones in living matter. In contrast, thiol-ene chemistry is very advantageous for conjugating or functionalizing colloids with biomacromolecules, such as proteins, due to the presence of thiols in cysteine-containing ones. It has been used for the complete crosslinking of NGs during their synthesis, but, to a reduced extent, also for their surface functionalization. These functionalized NGs can then be employed in various fields, including biosensing, bioimaging, drug delivery, and theranostics [42,43,44]. Among the most efficient Michael-type additions are the reactions between thiols and maleimides. The primary driving forces for this reaction are the electron-withdrawing effect of the two adjacent activating carbonyl groups and the release of ring strain upon product formation. The reaction between maleimides and thiol-containing biological molecules has been employed since 1949 [45]. However, it was not until 1980 that thiol–maleimide reactions were recognized as potential tools for the functionalization of nanocarriers. The maleimide–thiol reaction is widely used in functionalization protocols due to the high reactivity of maleimides under mild conditions, their selectivity for thiol groups at physiological pH, and the stability of the resulting thioether bond under physiological conditions. In addition to surface functionalization applications, the thiol–maleimide reaction is also used in the synthesis and modification of NGs for various biomedical purposes [46,47] (Figure 5). E.g., Altinbasak et al. prepared an NG system crosslinked through the Michael thiol–maleimide addition reaction, which can be degraded in a reducing environment through a thiol–disulfide exchange reaction [48]. A significant disadvantage in this reaction is the potential hydrolysis of maleimide groups to maleamic acids in aqueous solutions, which inhibits the reaction with thiols. This secondary reaction can significantly reduce the degree of functionalization and negatively affect the properties of the resulting system overall. Disulfide crosslinking, a reaction similar to the other ones discussed so far, is also a common method for NG synthesis that offers unique advantages for various applications. In this approach, the three-dimensional network structure results from the formation of disulfide bonds (-S-S-) between polymer chains having thiol moieties. In addition, the cleavable nature of disulfide bonds in response to certain stimuli, such as glutathione or reactive oxygen species (ROS) [49,50], enables the controlled release of encapsulated therapeutic agents within target cells or tissues. This responsiveness to environmental stimuli enhances the therapeutic efficacy and biocompatibility of disulfide-crosslinked NGs, making them promising candidates for biomedical applications [51,52,53].

Nanomaterials 14 01300 g005

Figure 5. (A) Synthesis and mode of action of bioresponsive polyglutamic acid nanogels (NGs): NGs are obtained by miniemulsion of azide- and alkyne-modified polyglutamic acid chains (blue and green filaments, respectively) crosslinked by click reactions (CuAAC) and then loaded with doxorubicin (DOX). The image also shows the degradation mechanism mediated by Cathepsin B (CatB), a lysosomal enzyme that is overexpressed in the stroma of some types of tumors. Reprinted with permission from Ref. [39]. (B) Illustration of the preparation of mucoadhesive hyaluronic acid thiol (HA-SH)/pluronic acid (PF127) NGs by thiol–maleimide click reactions. Using an ultrasonicator probe (US), NGs were produced by a double emulsion technique: first by sonicating maleimide-modified PF127 with doxorubicin and then by adding in the second emulsion hyaluronic acid modified with thiols. Reproduced from Ref. [47] with permission from copyright © 2024, American Chemical Society.

Figure 5. (A) Synthesis and mode of action of bioresponsive polyglutamic acid nanogels (NGs): NGs are obtained by miniemulsion of azide- and alkyne-modified polyglutamic acid chains (blue and green filaments, respectively) crosslinked by click reactions (CuAAC) and then loaded with doxorubicin (DOX). The image also shows the degradation mechanism mediated by Cathepsin B (CatB), a lysosomal enzyme that is overexpressed in the stroma of some types of tumors. Reprinted with permission from Ref. [39]. (B) Illustration of the preparation of mucoadhesive hyaluronic acid thiol (HA-SH)/pluronic acid (PF127) NGs by thiol–maleimide click reactions. Using an ultrasonicator probe (US), NGs were produced by a double emulsion technique: first by sonicating maleimide-modified PF127 with doxorubicin and then by adding in the second emulsion hyaluronic acid modified with thiols. Reproduced from Ref. [47] with permission from copyright © 2024, American Chemical Society.

Nanomaterials 14 01300 g005

3. Flow Chemistry Synthesis

The synthesis routes described above can also be used in flow chemistry. In this approach, also known as continuous processing or continuous flow chemistry, two or more streams of different reagents are pumped at specific flow rates into a chamber, tube, or microreactor. A reaction occurs, and the flow containing the resulting compound is collected at the outlet. To generate the final product, the solution can also be directed to subsequent loops of continuous reactors [54,55,56]. This route offers significant benefits over traditional batch chemistry, including enhanced mass and heat transfer, improved safety and reproducibility, increased reaction efficiency, reduced waste, and better scalability [57] (Table 3). Due to the intrinsic characteristics of continuous-flow reactors, it is possible to exploit reaction conditions not achievable in batch processes, allowing for precise control and real-time monitoring and resulting in high-quality products and streamlined processes. Advancements in 3D-printing flow setups and affordable electronic toolkits have made flow chemistry more accessible [58]. Continuous manufacturing, often coupled with photochemistry and photocatalysis, improves performance and safety while reducing costs [59,60,61]. Key challenges include solvent compatibilities and byproduct formation, necessitating inline analysis and purification strategies. Optimizing mass and heat transfer is crucial in flow chemistry; efficient mass transfer correlates with mixing efficiency, while heat transfer can be optimized by a high surface-to-volume ratio and by large heat-exchange surfaces in microchannels. Efficient heat transfer allows for isothermal or superheated conditions, improving chemical selectivity and safety. Small reactor volumes and precise reaction conditions provide, besides better mass and heat transfer, increased safety; some hazardous or impractical reactions can be safely conducted in flow conditions [62]. Flow chemistry allows for using lower reagent amounts, reducing costs and environmental impact. Scale-up can be achieved through numbering up or sizing up, maintaining the benefits of microreactor environments [63,64].

3.1. Microfluidics Systems

Several flow chemistry-based devices have been developed and optimized, and among them, microfluidics stands out as one of the most promising ones. Microfluidics technology is based on fluidic circuits where the channels have lateral dimensions of ten to hundreds of micrometers and aims at miniaturizing the manufacturing nanoparticle production apparatus (Figure 6). Compared to bulk synthesis, this approach leads to narrower size distributions, higher encapsulation efficiencies, sustained drug release profiles, and highly controlled synthesis conditions. Moreover, in the photochemistry case, the small lateral dimensions of the microchannels allow a better and more homogeneous illumination, even when molecules with high extinction coefficients are present. Additional benefits of microfluidics include low variation between batches, high throughput, reduced reagent volumes, low instrumental footprint, and scalable production yields. For these reasons, microfluidics is deemed a promising approach for the design of advanced micro- and nano-particles and micro- and nano-gels [65]. Microfluidic approaches can be employed for the production of several types of nanoparticles, from polymeric to lipidic to inorganic ones, by changing the microfluidic setup and mixing parameters [66]. E.g., for polymeric nanoparticles in general, several production strategies can be used to exploit microfluidics, like (i) nanoprecipitation, with the mixing time between solvent and non-solvent phases more easily tweakable for better control of nanoparticle nucleation and growth; (ii) self-assembly, which leverages the pH- or temperature-responsive behavior of amphiphilic derivatives; and (iii) droplet-based methods, which adopts immiscible phases to create flowing micro-emulsion droplets that act as micro-reactors. While nanoprecipitation and self-assembly methods are prone to channel clogging due to undesired interactions among reagents, droplet-based approaches provide rapid heat and mass transfer, enabling faster reaction kinetics and precise control over droplet size and composition [67].

Common microfluidic designs are based on hydrodynamic flow focusing (HFF) and staggered herringbone micromixer (SHM) [66]. HFF exploits the laminar flow regime typical of microfluidic platforms: a narrow stream of NP precursors (e.g., lipids or polymers dissolved in a solvent) flows parallel to an antisolvent (e.g., water or buffer) from two side channels. In this case, mixing occurs through diffusion because of the laminar flow [68]. In contrast, SHM induces micromixing through chaotic advection caused by structures on the microchannel floor or walls, achieving shorter mixing times at lower flow rates and, therefore, reducing dilution and synthesis times [69,70]. Such passive mixing technologies can be coupled with an active methodology to reduce the mixing time, control the nanoparticle size, and increase the throughput; active micromixing utilizes external energy sources to enhance mixing by disrupting the laminar flow regime, leading to faster homogenization and producing smaller NPs with narrower size distributions [71,72]. In this context, ultrasound is noteworthy, as it is generally employed to boost nucleation rates and significantly reduce NP mean size and polydispersity compared to other passive syntheses [73,74,75].

However, the employment of microfluidics faces several challenges. A possible difficulty arises from the fact that many materials used for microfluidic devices, like polydimethylsiloxane (PDMS), swell upon contact with organic solvents, potentially adsorbing small molecules and affecting device structure and nanoparticle production efficiency [76]. Moreover, the strong dependence of nanoparticle properties on multiple experimental factors calls for the application of a proper design of experiments (DoE). DoE, and in particular response surface methodology (RSM), is meant to identify critical variables and their interactions in order to predict the most suitable experimental conditions while minimizing costs and reagent waste [77,78,79].

3.2. Nanogels Produced through Microfluidics

Various methods for producing NGs via microfluidic platforms have been explored [17,20,80]: (i) Chemical gelation, involving emulsifying low-viscosity monomer solutions, followed by photoinduced crosslinking and polymerization, resulting in mechanically strong microgels and NGs; however, without proper optimization, these particles may not be easily enzymatically cleaved or metabolized, and photo-irradiation can be harmful to encapsulated biological species. (ii) Gelation induced by temperature changes after emulsification: e.g., heated agarose solutions can be cooled to form micro- or nano-gels. This approach has challenges in maintaining temperature differences across the microfluidic device and can potentially damage bioactive species. (iii) Coalescence-induced gelation: this strategy involves the coalescence of biopolymer droplets with crosslinking agent droplets, as demonstrated with alginate hydrogel microbeads; the productivity depends on droplet collision probabilities. (iv) Reversible shear thinning: droplets are formed from shear-thinning polymers that restore their network structure after emulsification. (v) Internal gelation: droplets contain a gelling polymer and a bound crosslinking agent. A compound in the continuous phase diffuses into the droplets, releasing the crosslinking agent and causing gelation; (vi) external gelation: droplets of gelling polymer are emulsified in a continuous phase containing a crosslinking agent. Diffusion of the agent into the droplets causes gelation.

These kinds of techniques were initially used to produce microgels, and some of the optimizations carried out in those cases and the applications of those microgels can also be considered for NGs. E.g., Zhao et al. [81] developed an injectable scaffold using droplet-based microfluidic technology and photo-crosslinking to synthesize bone marrow stromal cell (BMSC)-laden microgels; with a similar technique, Feng et al. [82] engineered multifunctional microgels with a precursor suspension containing kartogenin-loaded cyclodextrin nanoparticles (KGN@CD NPs), BMSCs, gelatin methacryloyl (GelMA), and phenylboronic acid-grafted methacrylate hyaluronic acid (HAMA-PBA). These microgels were then assembled using dynamic crosslinking between dopamine-modified hyaluronic acid (HA-DA) and phenylboronic acid groups on the surface of the microspheres. Upon injection into a cartilage defect, HA-DA facilitated adhesion to native tissue, and the microporous microgel assembly, along with sustained KGN release, promoted BMSC chondrogenesis and cartilage repair [82]. Seiffert and Weitz [83] used microfluidic devices to produce monodisperse poly(N-isopropylacrylamide) (pNIPAAm) microgels via a polymer-analogous crosslinking reaction, achieving higher crosslinking efficiency and greater homogeneity compared to classical free-radical crosslinking copolymerization techniques. Zhang et al. [65] prepared droplet-formed sodium alginate biomicrogels (hydrogel microbeads derived from biopolymers), whose synthesis is usually done in two stages: emulsification followed by gelation of the resulting droplets by chemical or physical crosslinking of the biopolymer. They generated stable alginate NGs through Ca 2+ -mediated crosslinking after having compared external and internal gelation in their microfluidic preparation. They showed that internal gelation had a limited application in this field because it did not allow control over morphology, and the resulting microgels were soft and not colloidally stable. In contrast, external gelation produced stable microgels with good control of the structure [65].

Microfluidic synthesis of NGs has demonstrated significant improvements in control and efficiency [20,80,84,85,86]. E.g., Bazban Shotorbani et al. [87] synthesized alginate NGs via ionic gelation using hydrodynamic flow-focusing microchips, achieving precise size control and monodispersity. Mahmoudi et al. [88] fine-tuned the flow rate ratio on microchips to form alginate NGs, while Huang et al. [89] created hyaluronic acid NGs via photo-click crosslinking on a microchip platform. Majedi et al. [90] utilized modified chitosan on a T-shaped microfluidic chip, and Chiesa et al. [91] formed chitosan/sodium triphosphate (TPP) NGs using a staggered herringbone micromixer.

Pessoa et al. [92] used microfluidic microchips in order to attempt to mitigate fouling issues in the production of chitosan/ATP nanoparticles, while Whiteley and Ho [93,94] addressed these fouling challenges by creating a 3D flow-focusing profile on a coaxial flow reactor (CFR), producing nanoparticles with smaller size and better monodispersity than 2D methods. They also tried to predict the interaction effects of process factors (component concentrations and flow ratio) on the size, PDI, and encapsulation efficiency of the NGs [93,94]. Giannitelli et al. [1] synthesized hyaluronic acid (HA) and linear polyethyleneimine (LPEI)-based NGs for controlled doxorubicin (DOX) delivery using a pressure-actuated microfluidic chip. The formation of NGs was confirmed by nuclear magnetic resonance (NMR) and Fourier-transform infrared (FTIR) analyses. NG specimens were also evaluated in terms of size and morphology through dynamic light scattering (DLS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and tunneling electron microscopy (TEM) analyses, in order to define a correlation between the active tuning of the flow focusing geometry and the physical features of the resulting nanoscaffolds. The optimized DOX-containing NGs demonstrated significant antitumor and anti-metastatic effects in vivo [1].

4. Stimuli-Responsive Nanogels

Nanogels for biomedical applications require stability in the environments of application but can also be engineered to adapt and respond to external signals by altering their chemical and physical properties. NGs can respond to a variety of stimuli, including physical (temperature, light, ultrasound, magnetic/electric fields, pressure), chemical (pH, redox potential), and biological (enzymes, specific biomolecules) ones. Stimulus-responsive NGs are promising nanoformulations that, by their selective response to environmental signals, improve therapeutic precision, offering versatile platforms for targeted therapies and diagnostics and minimizing systemic toxicity. Continued research into optimizing these nanomaterials has the potential to realize revolutionizing biomedical technologies while also advancing precision medicine and patient care. Other reviews have described in more detail the stimuli-response properties of NGs [15,95,96], so only a brief overview is provided below.

Among the various stimuli, pH is one of the most commonly used in biomedical science. Healthy tissues have a pH around 7.4, and tumor tissues range from 6.5 to 7.0; within cells, the cytosol has a pH similar to blood (7.4), the Golgi apparatus is at about 6.4, endosomes range from 5.5 to 6.0, and lysosomes are the most acidic at 4.5 to 5.0. pH-reactive NGs exploit these variations to deliver drugs in a targeted manner, minimizing off-target drug loss. These NGs are typically synthesized by incorporating acidic [97] or basic functional groups into the polymer backbone or using crosslinking molecules that degrade under specific pH conditions [98]. This design enhances the swelling and degradation of the NG, promoting the release of the encapsulated cargo [99].

Redox-responsive nanocarriers show great promise for delivering payloads within cells by exploiting the natural redox gradient between intracellular and extracellular environments to trigger the release of encapsulated substances. The antioxidant glutathione (GSH) primarily regulates these redox potentials, and its cytosolic concentration in cancer cells is significantly higher than in normal tissues. This difference highlights the importance of redox-responsive drug delivery systems for cancer-targeted therapies [100]. Recent studies on NGs have focused on incorporating disulfide-based crosslinking monomers to achieve precise control over degradation kinetics. This strategy optimizes the balance between crosslinking and the encapsulation/release of therapeutic agents, leading to the development of NGs specifically aimed at intracellular release in antitumoral applications [48,101,102,103].

Magnetic-responsive NGs combine magnetic properties with the ability to respond to external stimuli [104]. These NGs consist of magnetic nanoparticles incorporated into a polymer gel matrix that can react to various stimuli, such as temperature and pH changes, as well as magnetic fields. The unique physical properties of these NGs hybridized with magnetic nanoparticles offer several strategies for their use in biomedicine. For example, like non-responsive magnetic nanogels, they can be used as contrast agents in magnetic resonance imaging (MRI) or for the magnetic separation of target cells bound to NGs in aqueous media, both in vitro and in vivo. Moreover, due to both their magnetic properties and responsiveness, they are suitable for the controlled release of drugs at the tissue level [105]. E.g., after injection into the body, the drug-loaded magnetic NGs can be guided by magnetic forces to specific locations in vivo; depending on the gel’s responsiveness, these NGs can swell or shrink in response to changes in local temperature or pH, releasing the drugs in a controlled manner. In the case of thermoresponsive NGs, the hybridized magnetic nanoparticles can be used as components that generate heat in response to varying external magnetic fields or near-infrared radiation (NIR) [29,104,106].

Recent years have seen significant advances in NG technology, particularly in the development of systems that can recognize and respond to multiple stimuli. This progress involves the integration of various response functions into a single platform, thereby improving the versatility, effectiveness, and/or specificity of NG-based therapies [107,108]. By incorporating two or more stimulus-responsive components within a single NG delivery system, researchers aim to achieve a higher level of precision in therapeutic applications [109]. These sophisticated NGs can dynamically adjust their behavior in response to a combination of environmental stimuli such as pH, temperature, redox potential, and light exposure, enabling therapeutic payloads to be released in a controlled manner [110] (Figure 7).

5. Applications

As already mentioned, due to their unique structural and functional properties, NGs have garnered substantial interest in biomedical applications. Their biocompatibility and capacity to encapsulate drugs, proteins, and other biomolecules allow for targeted and controlled release, reducing side effects and enhancing treatment efficacy. As already mentioned, the possibility of stimuli-responsive NGs allows drugs to be delivered in a specific manner. NG cellular uptake and biodistribution behavior can also be regulated by different types of surface functionalization; factors such as polarity and surface charge affect the hydrophilicity of the NGs and their blood-circulation time. It should also be noted that the variety of synthesis methods mentioned above are not exclusive to single applications but can be adapted to formulate NGs for different purposes. In recent years, NGs have achieved considerable advancements in terms of design, optimization, functionalization, and application. Therefore, in this section, we will mainly discuss recently published biomedical applications.

5.1. Nanogels for Drug Delivery

Nanogel-based drug delivery systems are very efficient in precisely delivering drugs to their target sites, significantly reducing toxicity to surrounding healthy cells. This remarkable potential has led to extensive research into their application for the treatment of diseases with high morbidity and mortality rates, with the aim of improving traditional therapies and patients’ quality of life. Many NGs have a high encapsulation efficiency and drug-loading capacity and can be suitable for transporting both hydrophilic and hydrophobic drugs, including small molecules such as chemotherapeutic agents and inhibitors, as well as macromolecules such as proteins, DNA, or RNA [111,112,113]. Depending on the route of administration, NGs encounter various physiological barriers during drug delivery. This necessitates specific properties in the used NGs, such as mucoadhesivity and mucopenetrativity for mucosal routes, clearance-avoidance systems for intravenous routes, or sophisticated mechanisms capable of crossing the blood–brain barrier for delivery in the central nervous system. Several reviews [114,115,116] have examined these physiological barriers and the strategies for NGs to overcome them, illustrating typical cases, and, therefore, we will not elaborate further on this topic.

A big part of the research on NGs for drug delivery focuses primarily on cancer therapy; NGs designed for chemotherapeutic drug delivery play a crucial role in improving the efficacy and reducing the side effects of cancer treatments. These particles are designed to encapsulate chemotherapeutic agents, protecting them from degradation and improving their delivery to tumor sites [117,118]. She et al. [119] developed a hypoxia-degradable zwitterionic phosphorylcholine NG ( H PMPC NG) using an azobenzene-based crosslinker (Figure 8). This NG degrades under hypoxic conditions, triggering the collapse of its structure and the rapid release of the drug (DOX) into tumor tissues. The NGs showed prolonged accumulation in glioblastoma tissues and effectively inhibited the growth of this highly malignant tumor. However, the heterogeneity of tumors and the underlying limitations of some anticancer drugs can lead to incomplete eradication of cancer cells when using a single compound for treatment, with possible tumor recurrence. Combining multiple chemotherapeutic agents with different mechanisms of action, i.e., using “drug cocktails”, can synergistically increase therapeutic efficacy. As a result, there has recently been an intensification of loading NGs with multiple drugs [120,121]. For example, Zhang and his colleagues [122] designed a hyaluronic acid NG that can deliver DOX due to its cationic nature. The NG crosslinker used is cisplatin, which binds to the carboxyl (-COOH) side-groups of hyaluronic acid. This crosslinking stabilizes the drug-loaded NGs, preventing premature release during blood circulation. Besides focusing on specific diseases, many studies have created NG-based vectors for various applications, such as ocular administration; this innovative, noninvasive, and safer NG-based delivery method shows great potential for treating numerous conditions [123,124].

5.2. Nanogels for Bioimaging

Conventional imaging methods include various techniques used to visualize internal body structures for the diagnosis, monitoring, and treatment of medical conditions. For example, computed tomography (CT) combines X-rays with computer technology to generate detailed three-dimensional images of organs, bones, and tissues, proving invaluable for visualizing anatomical details and evaluating trauma, tumors, and cardiovascular diseases. Magnetic resonance imaging (MRI) employs magnetic fields and radio waves to produce detailed images of soft tissues, brain, spinal cord, and joints, making it ideal for diagnosing neurological problems, musculoskeletal injuries, and central nervous system disorders. Despite their wide use and significant contributions to medical diagnostics, these methods have limitations. In fact, the low resolution and limited signal-to-noise ratio (SNR) of these imaging techniques limit their wider application. Therefore, researchers have developed different contrast agents, i.e., substances that improve the visualization and definition of internal body structures by increasing the contrast between normal and abnormal tissues or between different types of tissues. This allows clearer and more detailed images, aiding the diagnosis and monitoring of medical conditions. Gadolinium is a transition metal used as a contrast agent in imaging techniques such as magnetic resonance imaging (MRI). It is often bound to organic molecules to increase its solubility and stability in a biological environment and sometimes to increase its concentration in certain tissues or cells. Due to its magnetic properties, gadolinium enhances the MRI contrast between different tissues in the body, allowing more detailed and accurate images. Despite its effectiveness in improving diagnosis, it has been reported that gadolinium can accumulate in body tissues, especially in the brain, and even in patients with normal renal function, although the extent and clinical implications of this phenomenon are still being studied and discussed. Among the various nanocarriers, contrast-agent-containing NGs are particularly popular due to their high water content and their ability to encapsulate a wide range of cargo [125,126] (Figure 8). Kimura et al. [127] developed ultra-small gelatin NGs as contrast agents for MRI that cannot pass through the blood–brain barrier. They used a γ-radiation crosslinking technique for the formation of these NGs and conjugated chelating agents to the protein constituting the NGs in order to load gadolinium (Gd) and form gadolinium-coordinated gelatin NGs (GdGN). In vivo studies confirmed the safety and effectiveness of GdGN as MRI contrast agents. GdGN were quickly eliminated via renal excretion within 90 min and did not cross the brain barriers. In their study, Shi and colleagues [128] synthesized (AuNP)-loaded γ-polyglutamic acid (γ-PGA) NGs using a dual-emulsion method for CT imaging of tumors. Initially, γ-PGA was activated with 1-ethyl-3-[3-(dimethylamino)propyl] carbodiimide hydrochloride (EDC) and then emulsified. Subsequently, polyethylenimine (PEI)-coated Au NPs [(Au0)200-PEI-NH2-mPEG]), synthesized by the reduction of (HAuCl4) with NaBH4, were crosslinked in situ. In vivo CT imaging of the tumors showed that the γ-PGA-[(Au0)200-PEI-NH2-mPEG] nanoparticles effectively accumulated within the tumors and provided a clear visualization of the site.

Multimodal imaging integrates multiple imaging techniques into a single procedure to provide complementary information about biological tissues. It combines modalities such as CT and MRI to enhance diagnostic sensitivity and specificity. This approach allows for a comprehensive assessment of anatomical structures and functional characteristics, aiding in early diagnosis, therapy monitoring, and understanding of pathophysiological processes. In the study of Sun et al. [129], PEI partially modified with polyethylene glycol (PEG) was used to encapsulate AuNPs and load gadolinium through chelation. Alginate NGs (AGs) were obtained by a double-emulsion process, where the PEI-Au-Gd particles acted as crosslinkers to crosslink the alginate by exploiting the activated carboxyl groups. The AG/PEI-Au-Gd NGs exhibited higher T1 relaxivity in MRI and greater X-ray attenuation in CT compared to PEI-AuGd nanoparticles and conventional iodinated contrast agents. Due to their enhanced cellular uptake relative to PEI-Au-Gd nanoparticles, AG/PEI-Au-Gd NGs represent a dual-mode MR/CT imaging system for improved visualization of tumor cells in vitro and enhanced imaging of tumors in vivo.

5.3. Nanogels for Regenerative Medicine

Nanogels have emerged as a promising tool in regenerative medicine, offering unique advantages due to their nanoscale size, high water content, and versatile structure. For this purpose, these hydrophilic polymeric networks are designed to encapsulate and deliver bioactive molecules like growth factors, cytokines, and genetic material in a controlled and targeted manner. The gel’s ability to mimic the natural extracellular matrix and provide a supportive environment for cell growth and differentiation makes it an ideal candidate for tissue engineering and regenerative therapies. This adaptability increases its potential to facilitate the repair and regeneration of damaged tissues and improve the integration of implanted biomaterials.

A field of application for these systems is bone tissue regeneration, where osteoclasts and osteoblasts handle bone resorption and formation, respectively; this is an intricate process involving other possible cell types and numerous intracellular and extracellular signaling pathways, including cytokines and growth factors [130]. However, natural physiological mechanisms are insufficient for repairing large bone defects. The preferred treatment for critical bone defects is still autologous bone grafting, known for its osteoconductive (via bone fragments), osteoinductive (via growth factors), and osteogenic (via cells) properties. Nonetheless, this method often leads to chronic pain, infections, iatrogenic fractures, and suboptimal aesthetic outcomes. Nanocarriers can replicate the natural nanostructure of bone, potentially forming a precisely controlled porous microstructure that boosts osteoconduction [131]. NG formulations can serve as injectable carriers for systemic or localized delivery of drugs or genetic material; moreover, they can be integrated into scaffolds to accurately host and release active substances during tissue growth and/or to adjust the scaffold’s physical properties [88,132].

Another important application of NGs is in wound healing. When the skin surface is damaged, the timely restoration of its integrity becomes critical. The wound-healing process takes place through stages of hemostasis, inflammation, proliferation, and remodeling. While minor wounds usually heal spontaneously in a few days, conditions such as diabetes, vascular insufficiency, or cancer can cause chronic wounds that resist normal healing. Delayed recovery of chronic wounds prolongs tissue regeneration, causing structural and functional damage. Due to their substantial water content, compatibility with natural extracellular matrices, ability to take desired shapes, and effective drug delivery capabilities, hydrogels have long been favored for wound healing. NGs inherit many of these advantages and have been designed for applications in managing bleeding and promoting wound healing [133,134,135]. For example, Zhang et al. [136] developed a novel nanocomposite consisting of chitin NGs and rectorite (a mineral with hemostasis properties) for effective hemorrhage control. Chitin chains are intercalated into the rectorite, and vigorous mechanical agitation produces chitin NGs. These NGs assemble onto rectorite nanoplates through electrostatic interactions, forming a sandwich-like structure. In experimental models, the nanocomposite achieves hemostasis in 121 s in rat tail incisions and shows superior hemostatic activity compared with Celox, a commercial chitosan-based hemostatic, in rabbit artery injury models [136]. The enhanced biocompatibility and hemostatic efficacy of the chitin/rectorite nanocomposite make it a promising and cost-effective option for hemorrhage management.

In addition to the applications mentioned above, NGs have also been studied for various other uses in regenerative medicine: cardiac repair [137,138], regeneration of ischemic limbs [139], coating of biointerfaces [140], etc. Despite the limited examples discussed in this review, extensive research in this area suggests that promising and encouraging applications of NGs in regenerative medicine are likely to emerge in the near future.

6. Characterization, Biocompatibility, Safety, and Long-Term Stability of Nanogels

After introducing the various applications of NGs, this chapter will address the potential challenges for their clinical translatability. Currently, there are no NG-based drugs or systems approved for clinical use. However, preclinical studies have shown promising results, indicating significant potential for their future clinical application. Current research efforts involving NG-based systems are focused on conducting in vitro and in vivo studies to validate their efficacy and safety in disease treatment. One of the biggest challenges for clinical translatability is reproducibility and scalability. As described in the chapter on synthetic methods, NG production involves a multitude of parameters and variables; different conditions and reaction settings produce NGs of varying sizes, shapes, and behaviors, posing a significant challenge in obtaining reproducible results from batch to batch [141].

However, standardized procedures for their characterization and the determination of their properties prior to use in specific applications have not yet been established. Currently, characterization techniques providing detailed information on the structure of NGs are based on established methods that have long been used for hydrogels and/or for the characterization of other polymeric nanoparticles. Some of the most used techniques are as follows:

Electron and atomic force microscopy: to observe the morphology and size of particles. X-ray diffraction and NMR spectroscopy: to analyze the chemical structure. Dynamic light scattering (DLS): to determine size distribution.

Thermogravimetric analysis (TGA): to assess thermal stability and to help in studying the composition, water content, and porosity of (nano)gels.

In addition, other fundamental properties, such as swelling behavior, solubility, rheology, and pore size, must be considered. The absence of a standardized characterization framework complicates the comparison of results from different studies and the evaluation of NG performance in clinical and industrial applications.

The cited inter-batch variability can affect the consistency of this performance, making it difficult, e.g., to ensure uniformity in their therapeutic efficacy and safety. Overcoming these challenges is crucial for advancing NG-based systems towards clinical application, and this could also be achieved by the use of microfluidic systems, as explained in Section 4. In any case, it is crucial to implement regulatory guidelines that oversee the synthesis and development of NGs, ensuring stringent adherence and upholding high standards of quality and safety. These guidelines would streamline the process of clinical translation, thereby facilitating the effective transition of NGs from preclinical studies to clinical applications.

Another significant challenge associated with NG systems is their biocompatibility and safety in humans; even if NGs, especially the ones composed of natural polymers, are usually considered more biocompatible than other kinds of nanoparticles [142], these features have yet to be fully explored. Indeed, NG-based carriers offer promising therapeutic potential but also present risks, so they require further research into their safety, feasibility, and long-term stability as a treatment modality. Potential immunogenicity may result from interactions between the NGs and the drug delivered into the body or from interactions with biological components, resulting in allergic, anaphylactic, or hypersensitivity reactions. Biocompatibility and safety need to be designed and described from the very first stage of in vitro product testing. Using established biocompatible polymers for the synthesis of NGs can help towards this end, as they have already been tested for safety and biocompatibility; however, extensive investigations of the potential toxicity of NGs resulting from prolonged exposure and possible accumulation in tissues remain to be performed. In general, the standard set of formal toxicological analyses conducted in the preclinical setting for any new drug (starting from cell cultures to in vivo tests) should be sufficient to detect tissue-specific adverse effects associated with a nanomedicine. This is a useful guiding principle; however, it is important to recognize that additional tests specific to the behavior of specific NG formulations may be needed in the preclinical setting. Summarizing clinical studies on NGs, it is notable that they are primarily administered through topical application, topical injection, or subcutaneous injection [143]. The intravenous injection route, commonly used in preclinical research, has not yet been widely analyzed, likely due to significant challenges in addressing safety, as well as efficacy concerns with systemic administration. Furthermore, while clinical studies involving NGs are increasing, most are currently in phase I or II trials [144,145], indicating that their clinical translation still requires substantial advancement.

7. Conclusions and Future Perspectives

Nanogels, first developed in the late 1990s as part of polymer science and nanotechnology [2], have undergone significant evolution, becoming an integral part of modern nanomedicine studies. This review provides a concise exploration of NGs, highlighting their synthesis techniques and some biomedical applications. NGs represent a key advance in drug delivery, potentially capable of precise targeting and controlled release.

Even though there is still a significant journey to bring NGs from bench to bedside, the results presented in the literature offer a positive outlook for NGs as a novel drug delivery system or diagnostic tools: (i) they hold promise for personalized therapies in regenerative medicine and (ii) they contribute to advances in biomedical imaging. Despite these advances, several challenges hinder their widespread clinical application. Many current synthesis processes necessitate crosslinking agents that are not entirely biocompatible, as well as extreme pH and temperature conditions, which could damage some cargo; to address these limitations, the use of peptide-based NGs (PBNs) could serve as an innovative solution [146,147,148].

Nanogels are still in the early stages of development and require extensive research to address issues such as reproducibility, scalability, efficient targeting, bioavailability, potential toxicity, and long-term stability. To facilitate their clinical translation, future research should focus on developing scalable manufacturing methods and on thoroughly investigating the benefits of NG-based therapies over traditional ones. Standardizing manufacturing processes and ensuring batch consistency are critical for regulatory approval and clinical adoption. Using flow chemistry approaches, especially based on microfluidics, could help in this aspect, but the research on quantifying the advantages of this approach over conventional ones (based on batch chemistry) is still in its infancy. Addressing biocompatibility and long-term safety through rigorous preclinical and clinical studies is also imperative. Future studies should aim to establish reliable large-scale production techniques for NGs without compromising their properties, preparing them for extensive clinical evaluation.

Author Contributions

Conceptualization, P.M., B.T. and S.L.; methodology, P.M., B.T. and S.L.; investigation, P.M.; data curation, P.M.; writing—original draft preparation, P.M.; writing—review and editing, P.M., B.T. and S.L.; visualization, P.M.; supervision, S.L.; funding acquisition, S.L. All authors have read and agreed to the published version of the manuscript.

Funding

This research received funding from the PNRR MUR projects financed by the European Union NextGenerationEU within the National Quantum Science and Technology Institute (NQSTI—INVESTIMENTO 1.3; PE_00000023) and the Tuscany Health Ecosystem (THE—INVESTIMENTO 1.5; ECS_00000017).

Data Availability Statement

Data are contained within the article.

Conflicts of Interest

The authors declare no conflicts of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

References

  1. Giannitelli, S.M.; Limiti, E.; Mozetic, P.; Pinelli, F.; Han, X.; Abbruzzese, F.; Basoli, F.; Del Rio, D.; Scialla, S.; Rossi, F.; et al. Droplet-Based Microfluidic Synthesis of Nanogels for Controlled Drug Delivery: Tailoring Nanomaterial Properties via Pneumatically Actuated Flow-Focusing Junction. Nanoscale 2022, 14 , 11415–11428. [Google Scholar] [CrossRef] [PubMed]
  2. Vinogradov, S.; Batrakova, E.; Kabanov, A. Poly(Ethylene Glycol)-Polyethyleneimine NanoGel(TM) Particles: Novel Drug Delivery Systems for Antisense Oligonucleotides. Colloids Surf. B Biointerfaces 1999, 16 , 291–304. [Google Scholar] [CrossRef]
  3. Vinogradov, S.V.; Bronich, T.K.; Kabanov, A.V. Nanosized Cationic Hydrogels for Drug Delivery: Preparation, Properties and Interactions with Cells. Adv. Drug Deliv. Rev. 2002, 54 , 135–147. [Google Scholar] [CrossRef] [PubMed]
  4. Peppas, N.A. (Ed.) Hydrogels in Medicine and Pharmacy ; CRC Press: Boca Raton, FL, USA, 2019; ISBN 9780429285097. [Google Scholar]
  5. Santi, M.; Maccari, G.; Mereghetti, P.; Voliani, V.; Rocchiccioli, S.; Ucciferri, N.; Luin, S.; Signore, G. Rational Design of a Transferrin-Binding Peptide Sequence Tailored to Targeted Nanoparticle Internalization. Bioconjug. Chem. 2017, 28 , 471–480. [Google Scholar] [CrossRef] [PubMed]
  6. Raemdonck, K.; Demeester, J.; De Smedt, S. Advanced Nanogel Engineering for Drug Delivery. Soft Matter 2009, 5 , 707–715. [Google Scholar] [CrossRef]
  7. Bhatia, S.N.; Chen, X.; Dobrovolskaia, M.A.; Lammers, T. Cancer Nanomedicine. Nat. Rev. Cancer 2022, 22 , 550–556. [Google Scholar] [CrossRef] [PubMed]
  8. Todaro, B.; Moscardini, A.; Luin, S. Pioglitazone-Loaded PLGA Nanoparticles: Towards the Most Reliable Synthesis Method. Int. J. Mol. Sci. 2022, 23 , 2522. [Google Scholar] [CrossRef] [PubMed]
  9. Froelich, A.; Jakubowska, E.; Jadach, B.; Gadziński, P.; Osmałek, T. Natural Gums in Drug-Loaded Micro- and Nanogels. Pharmaceutics 2023, 15 , 759. [Google Scholar] [CrossRef] [PubMed]
  10. Moshe, H.; Davizon, Y.; Menaker Raskin, M.; Sosnik, A. Novel Poly(Vinyl Alcohol)-Based Amphiphilic Nanogels by Non-Covalent Boric Acid Crosslinking of Polymeric Micelles. Biomater. Sci. 2017, 5 , 2295–2309. [Google Scholar] [CrossRef]
  11. Zhang, Y.; Song, W.; Lu, Y.; Xu, Y.; Wang, C.; Yu, D.G.; Kim, I. Recent Advances in Poly(α-L-Glutamic Acid)-Based Nanomaterials for Drug Delivery. Biomolecules 2022, 12 , 636. [Google Scholar] [CrossRef]
  12. Quazi, M.Z.; Park, N. Nanohydrogels: Advanced Polymeric Nanomaterials in the Era of Nanotechnology for Robust Functionalization and Cumulative Applications. Int. J. Mol. Sci. 2022, 23 , 1943. [Google Scholar] [CrossRef]
  13. Duan, Q.-Y.; Zhu, Y.-X.; Jia, H.-R.; Wang, S.-H.; Wu, F.-G. Nanogels: Synthesis, Properties, and Recent Biomedical Applications. Prog. Mater. Sci. 2023, 139 , 101167. [Google Scholar] [CrossRef]
  14. Srivastava, S.; Verma, N.K.; Agrawal, N.; Srivastava, S. A Brief Study on Nanogel: A Review. Sch. Acad. J. Pharm. 2024, 13 , 163–168. [Google Scholar] [CrossRef]
  15. Hajebi, S.; Rabiee, N.; Bagherzadeh, M.; Ahmadi, S.; Rabiee, M.; Roghani-Mamaqani, H.; Tahriri, M.; Tayebi, L.; Hamblin, M.R. Stimulus-Responsive Polymeric Nanogels as Smart Drug Delivery Systems. Acta Biomater. 2019, 92 , 1–18. [Google Scholar] [CrossRef]
  16. Zhao, Q.; Zhang, S.; Wu, F.; Li, D.; Zhang, X.; Chen, W.; Xing, B. Rational Design of Nanogels for Overcoming the Biological Barriers in Various Administration Routes. Angew. Chem. Int. Ed. 2021, 60 , 14760–14778. [Google Scholar] [CrossRef] [PubMed]
  17. Mauri, E.; Giannitelli, S.M.; Trombetta, M.; Rainer, A. Synthesis of Nanogels: Current Trends and Future Outlook. Gels 2021, 7 , 36. [Google Scholar] [CrossRef]
  18. Li, C.; Obireddy, S.R.; Lai, W.F. Preparation and Use of Nanogels as Carriers of Drugs. Drug Deliv. 2021, 28 , 1594–1602. [Google Scholar] [CrossRef]
  19. Kusmus, D.N.M.; van Veldhuisen, T.W.; Khan, A.; Cornelissen, J.J.L.M.; Paulusse, J.M.J. Uniquely Sized Nanogels via Crosslinking Polymerization. RSC Adv. 2022, 12 , 29423–29432. [Google Scholar] [CrossRef] [PubMed]
  20. Pandey, T.; Sharma, A.; Sandhu, A.; Pandey, V. Controlled Polymerization in Microfluidics: Advancement in Nanogel Synthesis. SPE Polym. 2024, 5 , 113–126. [Google Scholar] [CrossRef]
  21. Ribovski, L.; de Jong, E.; Mergel, O.; Zu, G.; Keskin, D.; van Rijn, P.; Zuhorn, I.S. Low Nanogel Stiffness Favors Nanogel Transcytosis across an in Vitro Blood–Brain Barrier. Nanomed. Nanotechnol. Biol. Med. 2021, 34 , 102377. [Google Scholar] [CrossRef]
  22. Peres, L.B.; dos Anjos, R.S.; Tappertzhofen, L.C.; Feuser, P.E.; de Araújo, P.H.H.; Landfester, K.; Sayer, C.; Muñoz-Espí, R. PH-Responsive Physically and Chemically Cross-Linked Glutamic-Acid-Based Hydrogels and Nanogels. Eur. Polym. J. 2018, 101 , 341–349. [Google Scholar] [CrossRef]
  23. Ay Şenyiğit, Z.; Coşkunmeriç, N.; Çağlar, E.Ş.; Öztürk, İ.; Atlıhan Gündoğdu, E.; Siafaka, P.I.; Üstündağ Okur, N. Chitosan-Bovine Serum Albumin-Carbopol 940 Nanogels for Mupirocin Dermal Delivery: Ex-Vivo Permeation and Evaluation of Cellular Binding Capacity via Radiolabeling. Pharm. Dev. Technol. 2021, 26 , 852–866. [Google Scholar] [CrossRef] [PubMed]
  24. Zhang, H.F.; Ma, L.; Su, F.; Ma, X.F.; Li, T.; Jian-Zha-Xi, W.; Zhao, G.H.; Wu, Z.M.; Hou, C.; Yan, H. jun PH and Reduction Dual-Responsive Feather Keratin—Sodium Alginate Nanogels with High Drug Loading Capacity for Tumor-Targeting DOX Delivery. Polym. Test. 2021, 103 , 107375. [Google Scholar] [CrossRef]
  25. Liu, Y.; Chen, D.; Zhang, A.; Xiao, M.; Li, Z.; Luo, W.; Pan, Y.; Qu, W.; Xie, S. Composite Inclusion Complexes Containing Hyaluronic Acid/Chitosan Nanosystems for Dual Responsive Enrofloxacin Release. Carbohydr. Polym. 2021, 252 , 117162. [Google Scholar] [CrossRef] [PubMed]
  26. Ren, D.-X.; Chen, P.-C.; Zheng, P.; Xu, Z.-N. PH/Redox Dual Response Nanoparticles with Poly-γ-Glutamic Acid for Enhanced Intracellular Drug Delivery. Colloids Surf. A Physicochem. Eng. Asp. 2019, 577 , 412–420. [Google Scholar] [CrossRef]
  27. Rusu, A.G.; Chiriac, A.P.; Nita, L.E.; Rosca, I.; Rusu, D.; Neamtu, I. Self-Assembled Nanocarriers Based on Modified Chitosan for Biomedical Applications: Preparation and Characterization. Polymers 2020, 12 , 2593. [Google Scholar] [CrossRef] [PubMed]
  28. Radeva, L.; Zaharieva, M.M.; Spassova, I.; Kovacheva, D.; Pencheva-El Tibi, I.; Najdenski, H.; Yoncheva, K. Biopolymeric Nanogel as a Drug Delivery System for Doxorubicin—Improved Drug Stability and Enhanced Antineoplastic Activity in Skin Cancer Cells. Pharmaceuticals 2024, 17 , 186. [Google Scholar] [CrossRef] [PubMed]
  29. Veloso, S.R.S.; Marta, E.S.; Rodrigues, P.V.; Moura, C.; Amorim, C.O.; Amaral, V.S.; Correa-Duarte, M.A.; Castanheira, E.M.S. Chitosan/Alginate Nanogels Containing Multicore Magnetic Nanoparticles for Delivery of Doxorubicin. Pharmaceutics 2023, 15 , 2194. [Google Scholar] [CrossRef]
  30. Thünemann, A.F.; Gruber, A.; Klinger, D. Amphiphilic Nanogels: Fuzzy Spheres with a Pseudo-Periodic Internal Structure. Langmuir 2020, 36 , 10979–10988. [Google Scholar] [CrossRef]
  31. Cho, S.H.; Hong, J.H.; Noh, Y.W.; Lee, E.; Lee, C.S.; Lim, Y.T. Raspberry-like Poly(γ-Glutamic Acid) Hydrogel Particles for Ph-Dependent Cell Membrane Passage and Controlled Cytosolic Delivery of Antitumor Drugs. Int. J. Nanomed. 2016, 11 , 5621–5632. [Google Scholar] [CrossRef]
  32. López-Iglesias, C.; Markovina, A.; Nirmalananthan-Budau, N.; Resch-Genger, U.; Klinger, D. Optically Monitoring the Microenvironment of a Hydrophobic Cargo in Amphiphilic Nanogels: Influence of Network Composition on Loading and Release. Nanoscale 2024, 16 , 9525–9535. [Google Scholar] [CrossRef] [PubMed]
  33. Gruber, A.; Işik, D.; Fontanezi, B.B.; Böttcher, C.; Schäfer-Korting, M.; Klinger, D. A Versatile Synthetic Platform for Amphiphilic Nanogels with Tunable Hydrophobicity. Polym. Chem. 2018, 9 , 5572–5584. [Google Scholar] [CrossRef]
  34. Bewersdorff, T.; Gruber, A.; Eravci, M.; Dumbani, M.; Klinger, D.; Haase, A. Amphiphilic Nanogels: Influence of Surface Hydrophobicity on Protein Corona, Biocompatibility and Cellular Uptake. Int. J. Nanomed. 2019, 14 , 7861–7878. [Google Scholar] [CrossRef] [PubMed]
  35. Kertsomboon, T.; Chirachanchai, S. Amphiphilic Biodegradable Co-Networks of Poly(Butylene Succinate)-Poly(Ethylene Glycol) Chains for Nano-Gelation via Click Chemistry and Its Potential Dispersant for Multi-Walled Carbon Nanotubes. Polym. Degrad. Stab. 2020, 179 , 109266. [Google Scholar] [CrossRef]
  36. Muñana-González, S.; Veloso-Fernández, A.; Ruiz-Rubio, L.; Pérez-Álvarez, L.; Vilas-Vilela, J.L. Covalent Cross-Linking as a Strategy to Prepare Water-Dispersible Chitosan Nanogels. Polymers 2023, 15 , 434. [Google Scholar] [CrossRef] [PubMed]
  37. Tian, Y.; Tian, R.; Chen, L.; Jin, R.; Feng, Y.; Bai, Y.; Chen, X. Redox-Responsive Nanogel with Intracellular Reconstruction and Programmable Drug Release for Targeted Tumor Therapy. Macromol. Rapid Commun. 2019, 40 , e1800824. [Google Scholar] [CrossRef] [PubMed]
  38. Kolb, H.C.; Finn, M.G.; Sharpless, K.B. Click Chemistry: Diverse Chemical Function from a Few Good Reactions. Angew. Chem.-Int. Ed. 2001, 40 , 2004–2021. [Google Scholar] [CrossRef]
  39. Duro-Castano, A.; Sousa-Herves, A.; Armiñán, A.; Charbonnier, D.; Arroyo-Crespo, J.J.; Wedepohl, S.; Calderón, M.; Vicent, M.J. Polyglutamic Acid-Based Crosslinked Doxorubicin Nanogels as an Anti-Metastatic Treatment for Triple Negative Breast Cancer. J. Control. Release 2021, 332 , 10–20. [Google Scholar] [CrossRef] [PubMed]
  40. Choi, H.; Kwon, M.; Choi, H.E.; Hahn, S.K.; Kim, K.S. Non-invasive Topical Drug-delivery System Using Hyaluronate Nanogels Crosslinked via Click Chemistry. Materials 2021, 14 , 1504. [Google Scholar] [CrossRef]
  41. Nagel, G.; Sousa-Herves, A.; Wedepohl, S.; Calderón, M. Matrix Metalloproteinase-Sensitive Multistage Nanogels Promote Drug Transport in 3D Tumor Model. Theranostics 2020, 10 , 91–108. [Google Scholar] [CrossRef]
  42. Lee, S.; Woo, C.; Ki, C.S. Pectin Nanogel Formation via Thiol-Norbornene Photo-Click Chemistry for Transcutaneous Antigen Delivery. J. Ind. Eng. Chem. 2022, 108 , 159–169. [Google Scholar] [CrossRef]
  43. Wang, J.; Wang, X.; Yan, G.; Fu, S.; Tang, R. PH-Sensitive Nanogels with Ortho Ester Linkages Prepared via Thiol-Ene Click Chemistry for Efficient Intracellular Drug Release. J. Colloid Interface Sci. 2017, 508 , 282–290. [Google Scholar] [CrossRef]
  44. Zhang, Y.; Andrén, O.C.J.; Nordström, R.; Fan, Y.; Malmsten, M.; Mongkhontreerat, S.; Malkoch, M. Off-Stoichiometric Thiol-Ene Chemistry to Dendritic Nanogel Therapeutics. Adv. Funct. Mater. 2019, 29 , 1806693. [Google Scholar] [CrossRef] [PubMed]
  45. Friedmann, E.; Marrian, D.H.; Simonreuss, I. Antimitotic Action of Maleimide and Related Substances. Br. J. Pharmacol. Chemother. 1949, 4 , 105–108. [Google Scholar] [CrossRef] [PubMed]
  46. Aktan, B.; Chambre, L.; Sanyal, R.; Sanyal, A. “Clickable” Nanogels via Thermally Driven Self-Assembly of Polymers: Facile Access to Targeted Imaging Platforms Using Thiol-Maleimide Conjugation. Biomacromolecules 2017, 18 , 490–497. [Google Scholar] [CrossRef] [PubMed]
  47. Li, F.; Chen, X.; He, Y.; Peng, Z. Mucoadhesive Thiolated Hyaluronic Acid/Pluronic F127 Nanogel Formation via Thiol-Maleimide Click Reaction for Intravesical Drug Delivery. ACS Appl. Bio Mater. 2024, 7 , 1976–1989. [Google Scholar] [CrossRef] [PubMed]
  48. Altinbasak, I.; Kocak, S.; Sanyal, R.; Sanyal, A. Redox-Responsive Nanogels for Drug-Delivery: Thiol-Maleimide and Thiol-Disulfide Exchange Chemistry as Orthogonal Tools for Fabrication and Degradation. Polym. Chem. 2023, 14 , 3897–3905. [Google Scholar] [CrossRef]
  49. Sui, B.; Wang, M.; Cheng, C.; Zhang, Q.; Zhang, J.; Fan, D.; Xu, P. Nanogel-Facilitated Protein Intracellular Specific Degradation through Trim-Away. Adv. Funct. Mater. 2021, 31 , 2010556. [Google Scholar] [CrossRef]
  50. Campea, M.A.; Lofts, A.; Xu, F.; Yeganeh, M.; Kostashuk, M.; Hoare, T. Disulfide-Cross-Linked Nanogel-Based Nanoassemblies for Chemotherapeutic Drug Delivery. ACS Appl. Mater. Interfaces 2023, 15 , 25324–25338. [Google Scholar] [CrossRef]
  51. Chen, D.; Zhu, X.; Tao, W.; Kong, Y.; Huag, Y.; Zhang, Y.; Liu, R.; Jiang, L.; Tang, Y.; Yu, H.; et al. Regulation of Pancreatic Cancer Microenvironment by an Intelligent Gemcitabine@nanogel System via in Vitro 3D Model for Promoting Therapeutic Efficiency. J. Control. Release 2020, 324 , 545–559. [Google Scholar] [CrossRef]
  52. Yang, Y.; Zhu, H.; Wang, J.; Fang, Q.; Peng, Z. Enzymatically Disulfide-Crosslinked Chitosan/Hyaluronic Acid Layer-by-Layer Self-Assembled Microcapsules for Redox-Responsive Controlled Release of Protein. ACS Appl. Mater. Interfaces 2018, 10 , 33493–33506. [Google Scholar] [CrossRef] [PubMed]
  53. Elkassih, S.A.; Kos, P.; Xiong, H.; Siegwart, D.J. Degradable Redox-Responsive Disulfide-Based Nanogel Drug Carriers: Via Dithiol Oxidation Polymerization. Biomater. Sci. 2019, 7 , 607–617. [Google Scholar] [CrossRef] [PubMed]
  54. Wegner, J.; Ceylan, S.; Kirschning, A. Flow Chemistry—A Key Enabling Technology for (Multistep) Organic Synthesis. Adv. Synth. Catal. 2012, 354 , 17–57. [Google Scholar] [CrossRef]
  55. Plutschack, M.B.; Pieber, B.; Gilmore, K.; Seeberger, P.H. The Hitchhiker’s Guide to Flow Chemistry. Chem. Rev. 2017, 117 , 11796–11893. [Google Scholar] [CrossRef] [PubMed]
  56. Breen, C.P.; Nambiar, A.M.K.; Jamison, T.F.; Jensen, K.F. Ready, Set, Flow! Automated Continuous Synthesis and Optimization. Trends Chem. 2021, 3 , 373–386. [Google Scholar] [CrossRef]
  57. Capaldo, L.; Wen, Z.; Noël, T. A Field Guide to Flow Chemistry for Synthetic Organic Chemists. Chem. Sci. 2023, 14 , 4230–4247. [Google Scholar] [CrossRef] [PubMed]
  58. Monia Kabandana, G.K.; Zhang, T.; Chen, C. Emerging 3D Printing Technologies and Methodologies for Microfluidic Development. Anal. Methods 2022, 14 , 2885–2906. [Google Scholar] [CrossRef] [PubMed]
  59. Dinter, R.; Willems, S.; Nissalk, T.; Hastürk, O.; Brunschweiger, A.; Kockmann, N. Development of a Microfluidic Photochemical Flow Reactor Concept by Rapid Prototyping. Front. Chem. 2023, 11 , 1244043. [Google Scholar] [CrossRef] [PubMed]
  60. Sohrabi, S.; Keshavarz Moraveji, M.; Iranshahi, D. A Review on the Design and Development of Photocatalyst Synthesis and Application in Microfluidic Reactors: Challenges and Opportunities. Rev. Chem. Eng. 2020, 36 , 687–722. [Google Scholar] [CrossRef]
  61. Sun, A.C.; Steyer, D.J.; Allen, A.R.; Payne, E.M.; Kennedy, R.T.; Stephenson, C.R.J. A Droplet Microfluidic Platform for High-Throughput Photochemical Reaction Discovery. Nat. Commun. 2020, 11 , 6202. [Google Scholar] [CrossRef]
  62. Rebrov, E.V.; Duinkerke, S.A.; de Croon, M.H.J.M.; Schouten, J.C. Optimization of Heat Transfer Characteristics, Flow Distribution, and Reaction Processing for a Microstructured Reactor/Heat-Exchanger for Optimal Performance in Platinum Catalyzed Ammonia Oxidation. Chem. Eng. J. 2003, 93 , 201–216. [Google Scholar] [CrossRef]
  63. Dong, Z.; Wen, Z.; Zhao, F.; Kuhn, S.; Noël, T. Scale-Up of Micro- and Milli-Reactors: An Overview of Strategies, Design Principles and Applications. Chem. Eng. Sci. X 2021, 10 , 100097. [Google Scholar] [CrossRef]
  64. Vladisavljević, G.T.; Khalid, N.; Neves, M.A.; Kuroiwa, T.; Nakajima, M.; Uemura, K.; Ichikawa, S.; Kobayashi, I. Industrial Lab-on-a-Chip: Design, Applications and Scale-up for Drug Discovery and Delivery. Adv. Drug Deliv. Rev. 2013, 65 , 1626–1663. [Google Scholar] [CrossRef]
  65. Zhang, H.; Tumarkin, E.; Sullan, R.M.A.; Walker, G.C.; Kumacheva, E. Exploring Microfluidic Routes to Microgels of Biological Polymers. Macromol. Rapid Commun. 2007, 28 , 527–538. [Google Scholar] [CrossRef]
  66. Liu, Y.; Yang, G.; Hui, Y.; Ranaweera, S.; Zhao, C.-X.; Liu, Y.; Yang, G.; Ranaweera, S.; Zhao, C.-X.; Hui, Y. Microfluidic Nanoparticles for Drug Delivery. Small 2022, 18 , 2106580. [Google Scholar] [CrossRef] [PubMed]
  67. Bandulasena, M.V.; Vladisavljević, G.T.; Benyahia, B. Droplet-Based Microfluidic Method for Robust Preparation of Gold Nanoparticles in Axisymmetric Flow Focusing Device. Chem. Eng. Sci. 2019, 195 , 657–664. [Google Scholar] [CrossRef]
  68. Baby, T.; Liu, Y.; Middelberg, A.P.J.; Zhao, C.X. Fundamental Studies on Throughput Capacities of Hydrodynamic Flow-Focusing Microfluidics for Producing Monodisperse Polymer Nanoparticles. Chem. Eng. Sci. 2017, 169 , 128–139. [Google Scholar] [CrossRef]
  69. Williams, M.S.; Longmuir, K.J.; Yager, P. A Practical Guide to the Staggered Herringbone Mixer. Lab Chip 2008, 8 , 1121–1129. [Google Scholar] [CrossRef]
  70. Hadjigeorgiou, A.G.; Boudouvis, A.G.; Kokkoris, G. Thorough Computational Analysis of the Staggered Herringbone Micromixer Reveals Transport Mechanisms and Enables Mixing Efficiency-Based Improved Design. Chem. Eng. J. 2021, 414 , 128775. [Google Scholar] [CrossRef]
  71. Hessel, V.; Löwe, H.; Schönfeld, F. Micromixers—A Review on Passive and Active Mixing Principles. In Proceedings of the Chemical Engineering Science, Pergamon, Turkey, 1 April 2005; Volume 60, pp. 2479–2501. [Google Scholar]
  72. Bayareh, M.; Ashani, M.N.; Usefian, A. Active and Passive Micromixers: A Comprehensive Review. Chem. Eng. Process. Process Intensif. 2020, 147 , 107771. [Google Scholar] [CrossRef]
  73. Delacour, C.; Stephens, D.S.; Lutz, C.; Mettin, R.; Kuhn, S. Design and Characterization of a Scaled-Up Ultrasonic Flow Reactor. Org. Process Res. Dev. 2020, 24 , 2085–2093. [Google Scholar] [CrossRef]
  74. Dong, Z.; Udepurkar, A.P.; Kuhn, S. Synergistic Effects of the Alternating Application of Low and High Frequency Ultrasound for Particle Synthesis in Microreactors. Ultrason. Sonochem. 2020, 60 , 104800. [Google Scholar] [CrossRef]
  75. Udepurkar, A.P.; Clasen, C.; Kuhn, S. Emulsification Mechanism in an Ultrasonic Microreactor: Influence of Surface Roughness and Ultrasound Frequency. Ultrason. Sonochem. 2023, 94 , 106323. [Google Scholar] [CrossRef]
  76. Shakeri, A.; Khan, S.; Didar, T.F. Conventional and Emerging Strategies for the Fabrication and Functionalization of PDMS-Based Microfluidic Devices. Lab Chip 2021, 21 , 3053–3075. [Google Scholar] [CrossRef] [PubMed]
  77. Choi, J.W.; Kim, Y.J.; Lee, J.M.; Choi, J.H.; Choi, J.W.; Chung, B.G. Droplet-Based Synthesis of Homogeneous Gold Nanoparticles for Enhancing HRP-Based ELISA Signals. Biochip J. 2020, 14 , 298–307. [Google Scholar] [CrossRef]
  78. Rebollo, R.; Oyoun, F.; Corvis, Y.; El-Hammadi, M.M.; Saubamea, B.; Andrieux, K.; Mignet, N.; Alhareth, K. Microfluidic Manufacturing of Liposomes: Development and Optimization by Design of Experiment and Machine Learning. ACS Appl. Mater. Interfaces 2022, 14 , 39736–39745. [Google Scholar] [CrossRef]
  79. Gholinejad, M.; Jabari Moghadam, A.; Mousavi Shaegh, S.A.; Miri, A.K. Multifactorial Analysis of Ion Concentration Polarization for Microfluidic Preconcentrating Applications Using Response Surface Method. Phys. Fluids 2020, 32 , 72012. [Google Scholar] [CrossRef]
  80. Zoratto, N.; Montanari, E.; Viola, M.; Wang, J.; Coviello, T.; Di Meo, C.; Matricardi, P. Strategies to Load Therapeutics into Polysaccharide-Based Nanogels with a Focus on Microfluidics: A Review. Carbohydr. Polym. 2021, 266 , 118119. [Google Scholar] [CrossRef] [PubMed]
  81. Zhao, X.; Liu, S.; Yildirimer, L.; Zhao, H.; Ding, R.; Wang, H.; Cui, W.; Weitz, D. Injectable Stem Cell-Laden Photocrosslinkable Microspheres Fabricated Using Microfluidics for Rapid Generation of Osteogenic Tissue Constructs. Adv. Funct. Mater. 2016, 26 , 2809–2819. [Google Scholar] [CrossRef]
  82. Feng, Q.; Li, D.; Li, Q.; Li, S.; Huang, H.; Li, H.; Dong, H.; Cao, X. Dynamic Nanocomposite Microgel Assembly with Microporosity, Injectability, Tissue-Adhesion, and Sustained Drug Release Promotes Articular Cartilage Repair and Regeneration. Adv. Healthc. Mater. 2022, 11 , 2102395. [Google Scholar] [CrossRef]
  83. Seiffert, S.; Weitz, D.A. Controlled Fabrication of Polymer Microgels by Polymer-Analogous Gelation in Droplet Microfluidics. Soft Matter 2010, 6 , 3184. [Google Scholar] [CrossRef]
  84. Salvati, B.; Santagapita, P.; Perullini, M. Exploring the Conditions to Generate Alginate Nanogels. J. Sol-Gel Sci. Technol. 2022, 102 , 142–150. [Google Scholar] [CrossRef]
  85. Su, M.; Zhu, Y.; Chen, J.; Zhang, B.; Sun, C.; Chen, M.; Yang, X. Microfluidic Synthesis of Manganese-Alginate Nanogels with Self-Supplying H2O2 Capability for Synergistic Chemo/Chemodynamic Therapy and Boosting Anticancer Immunity. Chem. Eng. J. 2022, 435 , 134926. [Google Scholar] [CrossRef]
  86. Montalbo, R.C.K.; Wu, M.J.; Tu, H.L. One-Step Flow Synthesis of Size-Controlled Polymer Nanogels in a Fluorocarbon Microfluidic Chip. RSC Adv. 2024, 14 , 11258–11265. [Google Scholar] [CrossRef] [PubMed]
  87. Bazban-Shotorbani, S.; Dashtimoghadam, E.; Karkhaneh, A.; Hasani-Sadrabadi, M.M.; Jacob, K.I. Microfluidic Directed Synthesis of Alginate Nanogels with Tunable Pore Size for Efficient Protein Delivery. Langmuir 2016, 32 , 4996–5003. [Google Scholar] [CrossRef] [PubMed]
  88. Mahmoudi, Z.; Mohammadnejad, J.; Razavi Bazaz, S.; Abouei Mehrizi, A.; Saidijam, M.; Dinarvand, R.; Ebrahimi Warkiani, M.; Soleimani, M. Promoted Chondrogenesis of HMCSs with Controlled Release of TGF-Β3 via Microfluidics Synthesized Alginate Nanogels. Carbohydr. Polym. 2020, 229 , 115551. [Google Scholar] [CrossRef]
  89. Huang, K.; He, Y.; Zhu, Z.; Guo, J.; Wang, G.; Deng, C.; Zhong, Z. Small, Traceable, Endosome-Disrupting, and Bioresponsive Click Nanogels Fabricated via Microfluidics for CD44-Targeted Cytoplasmic Delivery of Therapeutic Proteins. ACS Appl. Mater. Interfaces 2019, 11 , 22171–22180. [Google Scholar] [CrossRef] [PubMed]
  90. Majedi, F.S.; Hasani-Sadrabadi, M.M.; Hojjati Emami, S.; Shokrgozar, M.A.; Vandersarl, J.J.; Dashtimoghadam, E.; Bertsch, A.; Renaud, P. Microfluidic Assisted Self-Assembly of Chitosan Based Nanoparticles as Drug Delivery Agents. Lab Chip 2013, 13 , 204–207. [Google Scholar] [CrossRef] [PubMed]
  91. Chiesa, E.; Greco, A.; Riva, F.; Tosca, E.M.; Dorati, R.; Pisani, S.; Modena, T.; Conti, B.; Genta, I. Staggered Herringbone Microfluid Device for the Manufacturing of Chitosan/TPP Nanoparticles: Systematic Optimization and Preliminary Biological Evaluation. Int. J. Mol. Sci. 2019, 20 , 6212. [Google Scholar] [CrossRef]
  92. Pessoa, A.C.S.N.; Sipoli, C.C.; de la Torre, L.G. Effects of Diffusion and Mixing Pattern on Microfluidic-Assisted Synthesis of Chitosan/ATP Nanoparticles. Lab Chip 2017, 17 , 2281–2293. [Google Scholar] [CrossRef]
  93. Whiteley, Z.; Ho, H.M.K.; Gan, Y.X.; Panariello, L.; Gkogkos, G.; Gavriilidis, A.; Craig, D.Q.M. Microfluidic Synthesis of Protein-Loaded Nanogels in a Coaxial Flow Reactor Using a Design of Experiments Approach. Nanoscale Adv. 2021, 3 , 2039–2055. [Google Scholar] [CrossRef] [PubMed]
  94. Whiteley, Z.; Massaro, G.; Gkogkos, G.; Gavriilidis, A.; Waddington, S.N.; Rahim, A.A.; Craig, D.Q.M. Microfluidic Production of Nanogels as Alternative Triple Transfection Reagents for the Manufacture of Adeno-Associated Virus Vectors. Nanoscale 2023, 15 , 5865–5876. [Google Scholar] [CrossRef] [PubMed]
  95. Chakroborty, S.; Nath, N.; Mahal, A.; Barik, A.; Panda, A.R.; Fahaduddin; Bal, T.; Obaidullah, A.J.; Elawady, A. Stimuli-Responsive Nanogels: A Smart Material for Biomedical Applications. J. Mol. Liq. 2024, 403 , 124828. [Google Scholar] [CrossRef]
  96. Kumar, N.; Singh, S.; Sharma, P.; Kumar, B.; Kumar, A. Single-, Dual-, and Multi-Stimuli-Responsive Nanogels for Biomedical Applications. Gels 2024, 10 , 61. [Google Scholar] [CrossRef] [PubMed]
  97. Wang, X.; Zheng, Y.; Xue, Y.; Wu, Y.; Liu, Y.; Cheng, X.; Tang, R. PH-Sensitive and Tumor-Targeting Nanogels Based on Ortho Ester-Modified PEG for Improving the in Vivo Anti-Tumor Efficiency of Doxorubicin. Colloids Surf. B. Biointerfaces 2021, 207 , 112024. [Google Scholar] [CrossRef] [PubMed]
  98. Liu, L.; Luan, S.; Zhang, C.; Wang, R.; Zhang, Y.; Zhang, M.; Sheng, Q.; Han, G.; Wang, T.; Song, S. Encapsulation and PH-Responsive Release of Bortezomib by Dopamine Grafted Hyaluronate Nanogels. Int. J. Biol. Macromol. 2021, 183 , 369–378. [Google Scholar] [CrossRef] [PubMed]
  99. Rashidzadeh, H.; Tabatabaei Rezaei, S.J.; Danafar, H.; Ramazani, A. Multifunctional PH-Responsive Nanogel for Malaria and Cancer Treatment: Hitting Two Targets with One Arrow. J. Drug Deliv. Sci. Technol. 2022, 76 , 103740. [Google Scholar] [CrossRef]
  100. Dabas, R.; Kamaly, N. Redox-Responsive Nanogels for Precision Protein Delivery. Eur. Polym. J. 2024, 215 , 113183. [Google Scholar] [CrossRef]
  101. Laradji, A.M.; Kolesnikov, A.V.; Karakoçak, B.B.; Kefalov, V.J.; Ravi, N. Redox-Responsive Hyaluronic Acid-Based Nanogels for the Topical Delivery of the Visual Chromophore to Retinal Photoreceptors. ACS Omega 2021, 6 , 6172–6184. [Google Scholar] [CrossRef]
  102. Peng, H.; Huang, X.; Melle, A.; Karperien, M.; Pich, A. Redox-Responsive Degradable Prodrug Nanogels for Intracellular Drug Delivery by Crosslinking of Amine-Functionalized Poly(N-Vinylpyrrolidone) Copolymers. J. Colloid Interface Sci. 2019, 540 , 612–622. [Google Scholar] [CrossRef]
  103. Wang, K.-S.; Jin, Y.-F.; Tong, Q.-S.; Huang, Y.-C.; Gao, Z.-L.; Zheng, S.-J.; Zhang, J.-Y.; Wang, J.; Du, J.-Z. A Redox-Responsive Prodrug Nanogel of TLR7/8 Agonist for Improved Cancer Immunotherapy. Chin. J. Polym. Sci. 2023, 41 , 32–39. [Google Scholar] [CrossRef]
  104. Sung, B.; Kim, M.; Abelmann, L. Magnetic Microgels and Nanogels: Physical Mechanisms and Biomedical Applications. Bioeng. Transl. Med. 2021, 6 , e10190. [Google Scholar] [CrossRef] [PubMed]
  105. Yao, C.; Yuan, Y.; Yang, D. Magnetic DNA Nanogels for Targeting Delivery and Multistimuli-Triggered Release of Anticancer Drugs. ACS Appl. Bio Mater. 2018, 1 , 2012–2020. [Google Scholar] [CrossRef] [PubMed]
  106. Biglione, C.; Bergueiro, J.; Wedepohl, S.; Klemke, B.; Strumia, M.C.; Calderón, M. Revealing the NIR-Triggered Chemotherapy Therapeutic Window of Magnetic and Thermoresponsive Nanogels. Nanoscale 2020, 12 , 21635–21646. [Google Scholar] [CrossRef] [PubMed]
  107. Macchione, M.A.; Bedoya, D.A.; Rivero-Buceta, E.; Botella, P.; Strumia, M.C. Mesoporous Silica and Oligo (Ethylene Glycol) Methacrylates-Based Dual-Responsive Hybrid Nanogels. Nanomaterials 2022, 12 , 3835. [Google Scholar] [CrossRef] [PubMed]
  108. Yang, L.; Ling, J.; Wang, N.; Jiang, Y.; Lu, Y.; Yang, L.Y.; Ouyang, X.K. Delivery of Doxorubicin by Dual Responsive Carboxymethyl Chitosan Based Nanogel and in Vitro Performance. Mater. Today Commun. 2022, 31 , 103781. [Google Scholar] [CrossRef]
  109. Gray, D.M.; Town, A.R.; Niezabitowska, E.; Rannard, S.P.; McDonald, T.O. Dual-Responsive Degradable Core-Shell Nanogels with Tuneable Aggregation Behaviour. RSC Adv. 2022, 12 , 2196–2206. [Google Scholar] [CrossRef] [PubMed]
  110. Pillarisetti, S.; Vijayan, V.; Rangasamy, J.; Bardhan, R.; Uthaman, S.; Park, I.-K. A Multi-Stimuli Responsive Alginate Nanogel for Anticancer Chemo-Photodynamic Therapy. J. Ind. Eng. Chem. 2023, 123 , 361–370. [Google Scholar] [CrossRef]
  111. Jiang, T.; Ma, Y.; Xu, X.; Ji, Q.; Feng, M.; Cheng, C.; Feng, Y.; He, B.; Mo, R. Enzyme-Instructed Hybrid Nanogel/Nanofiber Oligopeptide Hydrogel for Localized Protein Delivery. Acta Pharm. Sin. B 2021, 11 , 2070–2079. [Google Scholar] [CrossRef]
  112. Huang, X.; Wu, G.; Liu, C.; Hua, X.; Tang, Z.; Xiao, Y.; Chen, W.; Zhou, J.; Kong, N.; Huang, P.; et al. Intercalation-Driven Formation of SiRNA Nanogels for Cancer Therapy. Nano Lett. 2021, 21 , 9706–9714. [Google Scholar] [CrossRef]
  113. Ding, F.; Huang, X.; Gao, X.; Xie, M.; Pan, G.; Li, Q.; Song, J.; Zhu, X.; Zhang, C. A Non-Cationic Nucleic Acid Nanogel for the Delivery of the CRISPR/Cas9 Gene Editing Tool. Nanoscale 2019, 11 , 17211–17215. [Google Scholar] [CrossRef] [PubMed]
  114. Siafaka, P.I.; Özcan Bülbül, E.; Okur, M.E.; Karantas, I.D.; Üstündağ Okur, N. The Application of Nanogels as Efficient Drug Delivery Platforms for Dermal/Transdermal Delivery. Gels 2023, 9 , 753. [Google Scholar] [CrossRef] [PubMed]
  115. Manimaran, V.; Nivetha, R.P.; Tamilanban, T.; Narayanan, J.; Vetriselvan, S.; Fuloria, N.K.; Chinni, S.V.; Sekar, M.; Fuloria, S.; Wong, L.S.; et al. Nanogels as Novel Drug Nanocarriers for CNS Drug Delivery. Front. Mol. Biosci. 2023, 10 , 1232109. [Google Scholar] [CrossRef] [PubMed]
  116. Yin, Y.; Hu, B.; Yuan, X.; Cai, L.; Gao, H.; Yang, Q. Nanogel: A Versatile Nano-Delivery System for Biomedical Applications. Pharmaceutics 2020, 12 , 290. [Google Scholar] [CrossRef] [PubMed]
  117. Sun, M.; He, L.; Fan, Z.; Tang, R.; Du, J. Effective Treatment of Drug-Resistant Lung Cancer via a Nanogel Capable of Reactivating Cisplatin and Enhancing Early Apoptosis. Biomaterials 2020, 257 , 120252. [Google Scholar] [CrossRef] [PubMed]
  118. Li, X.; Ouyang, Z.; Li, H.; Hu, C.; Saha, P.; Xing, L.; Shi, X.; Pich, A. Dendrimer-Decorated Nanogels: Efficient Nanocarriers for Biodistribution in Vivo and Chemotherapy of Ovarian Carcinoma. Bioact. Mater. 2021, 6 , 3244–3253. [Google Scholar] [CrossRef] [PubMed]
  119. She, D.; Huang, H.; Li, J.; Peng, S.; Wang, H.; Yu, X. Hypoxia-Degradable Zwitterionic Phosphorylcholine Drug Nanogel for Enhanced Drug Delivery to Glioblastoma. Chem. Eng. J. 2021, 408 , 127359. [Google Scholar] [CrossRef]
  120. Lu, Y.; Jia, D.; Ma, X.; Liang, M.; Hou, S.; Qiu, W.; Gao, Y.; Xue, P.; Kang, Y.; Xu, Z. Reduction-Responsive Chemo-Capsule-Based Prodrug Nanogel for Synergistic Treatment of Tumor Chemotherapy. ACS Appl. Mater. Interfaces 2021, 13 , 8940–8951. [Google Scholar] [CrossRef] [PubMed]
  121. Pooresmaeil, M.; Namazi, H.; Salehi, R. Dual Anticancer Drug Delivery of D-Galactose-Functionalized Stimuli-Responsive Nanogels for Targeted Therapy of the Liver Hepatocellular Carcinoma. Eur. Polym. J. 2022, 167 , 111061. [Google Scholar] [CrossRef]
  122. Zhang, Y.; Wang, F.; Li, M.; Yu, Z.; Qi, R.; Ding, J.; Zhang, Z.; Chen, X. Self-Stabilized Hyaluronate Nanogel for Intracellular Codelivery of Doxorubicin and Cisplatin to Osteosarcoma. Adv. Sci. 2018, 5 , 1700821. [Google Scholar] [CrossRef]
  123. Wu, Y.; Tao, Q.; Xie, J.; Lu, L.; Xie, X.; Zhang, Y.; Jin, Y. Advances in Nanogels for Topical Drug Delivery in Ocular Diseases. Gels 2023, 9 , 292. [Google Scholar] [CrossRef]
  124. Lee, H.; Noh, H. Advancements in Nanogels for Enhanced Ocular Drug Delivery: Cutting-Edge Strategies to Overcome Eye Barriers. Gels 2023, 9 , 718. [Google Scholar] [CrossRef]
  125. Cao, Y.; Mao, Z.; He, Y.; Kuang, Y.; Liu, M.; Zhou, Y.; Zhang, Y.; Pei, R. Extremely Small Iron Oxide Nanoparticle-Encapsulated Nanogels as a Glutathione-Responsive T1 Contrast Agent for Tumor-Targeted Magnetic Resonance Imaging. ACS Appl. Mater. Interfaces 2020, 12 , 26973–26981. [Google Scholar] [CrossRef] [PubMed]
  126. Feng, Z.; Li, Q.; Wang, W.; Ni, Q.; Wang, Y.; Song, H.; Zhang, C.; Kong, D.; Liang, X.J.; Huang, P. Superhydrophilic Fluorinated Polymer and Nanogel for High-Performance 19F Magnetic Resonance Imaging. Biomaterials 2020, 256 , 120184. [Google Scholar] [CrossRef] [PubMed]
  127. Kimura, A.; Jo, J.; Yoshida, F.; Hong, Z.; Tabata, Y.; Sumiyoshi, A.; Taguchi, M.; Aoki, I. Ultra-Small Size Gelatin Nanogel as a Blood Brain Barrier Impermeable Contrast Agent for Magnetic Resonance Imaging. Acta Biomater. 2021, 125 , 290–299. [Google Scholar] [CrossRef] [PubMed]
  128. Zhu, J.; Sun, W.; Zhang, J.; Zhou, Y.; Shen, M.; Peng, C.; Shi, X. Facile Formation of Gold-Nanoparticle-Loaded γ-Polyglutamic Acid Nanogels for Tumor Computed Tomography Imaging. Bioconjug. Chem. 2017, 28 , 2692–2697. [Google Scholar] [CrossRef] [PubMed]
  129. Sun, W.; Zhang, J.; Zhang, C.; Zhou, Y.; Zhu, J.; Peng, C.; Shen, M.; Shi, X. A Unique Nanogel-Based Platform for Enhanced Dual Mode Tumor MR/CT Imaging. J. Mater. Chem. B 2018, 6 , 4835–4842. [Google Scholar] [CrossRef]
  130. Tanaka, Y.; Nakayamada, S.; Okada, Y. Osteoblasts and Osteoclasts in Bone Remodeling and Inflammation. Curr. Drug Targets Inflamm. Allergy 2005, 4 , 325–328. [Google Scholar] [CrossRef]
  131. Shimoda, A.; Chen, Y.; Akiyoshi, K. Nanogel Containing Electrospun Nanofibers as a Platform for Stable Loading of Proteins. RSC Adv. 2016, 6 , 40811–40817. [Google Scholar] [CrossRef]
  132. Zhang, Q.; Chen, X.; Geng, S.; Wei, L.; Miron, R.J.; Zhao, Y.; Zhang, Y. Nanogel-Based Scaffolds Fabricated for Bone Regeneration with Mesoporous Bioactive Glass and Strontium: In Vitro and in Vivo Characterization. J. Biomed. Mater. Res. Part A 2017, 105 , 1175–1183. [Google Scholar] [CrossRef]
  133. Fan, Y.; Lüchow, M.; Zhang, Y.; Lin, J.; Fortuin, L.; Mohanty, S.; Brauner, A.; Malkoch, M. Nanogel Encapsulated Hydrogels As Advanced Wound Dressings for the Controlled Delivery of Antibiotics. Adv. Funct. Mater. 2021, 31 , 2006453. [Google Scholar] [CrossRef]
  134. Zhang, S.; Li, Y.; Qiu, X.; Jiao, A.; Luo, W.; Lin, X.; Zhang, X.; Zhang, Z.; Hong, J.; Cai, P.; et al. Incorporating Redox-Sensitive Nanogels into Bioabsorbable Nanofibrous Membrane to Acquire ROS-Balance Capacity for Skin Regeneration. Bioact. Mater. 2021, 6 , 3461–3472. [Google Scholar] [CrossRef] [PubMed]
  135. El-Feky, G.S.; El-Banna, S.T.; El-Bahy, G.S.; Abdelrazek, E.M.; Kamal, M. Alginate Coated Chitosan Nanogel for the Controlled Topical Delivery of Silver Sulfadiazine. Carbohydr. Polym. 2017, 177 , 194–202. [Google Scholar] [CrossRef]
  136. Zhang, J.; Xue, S.; Zhu, X.; Zhao, Y.; Chen, Y.; Tong, J.; Shi, X.; Du, Y.; Zhong, Z.; Ye, Q. Emerging Chitin Nanogels/Rectorite Nanocomposites for Safe and Effective Hemorrhage Control. J. Mater. Chem. B 2019, 7 , 5096–5103. [Google Scholar] [CrossRef]
  137. Tang, J.; Cui, X.; Caranasos, T.G.; Hensley, M.T.; Vandergriff, A.C.; Hartanto, Y.; Shen, D.; Zhang, H.; Zhang, J.; Cheng, K. Heart Repair Using Nanogel-Encapsulated Human Cardiac Stem Cells in Mice and Pigs with Myocardial Infarction. ACS Nano 2017, 11 , 9738–9749. [Google Scholar] [CrossRef] [PubMed]
  138. Zhang, L.; Liu, G.; Lv, K.; Xin, J.; Wang, Y.; Zhao, J.; Hu, W.; Xiao, C.; Zhu, K.; Zhu, L.; et al. Surface-Anchored Nanogel Coating Endows Stem Cells with Stress Resistance and Reparative Potency via Turning Down the Cytokine-Receptor Binding Pathways. Adv. Sci. 2021, 8 , 2003348. [Google Scholar] [CrossRef]
  139. Dang, Y.; Gao, N.; Niu, H.; Guan, Y.; Fan, Z.; Guan, J. Targeted Delivery of a Matrix Metalloproteinases-2 Specific Inhibitor Using Multifunctional Nanogels to Attenuate Ischemic Skeletal Muscle Degeneration and Promote Revascularization. ACS Appl. Mater. Interfaces 2021, 13 , 5907–5918. [Google Scholar] [CrossRef]
  140. Wang, Y.; Ma, B.; Liu, K.; Luo, R.; Wang, Y. A Multi-in-One Strategy with Glucose-Triggered Long-Term Antithrombogenicity and Sequentially Enhanced Endothelialization for Biological Valve Leaflets. Biomaterials 2021, 275 , 120981. [Google Scholar] [CrossRef] [PubMed]
  141. Tehrani, S.F.; Bharadwaj, P.; Leblond Chain, J.; Roullin, V.G. Purification Processes of Polymeric Nanoparticles: How to Improve Their Clinical Translation? J. Control. Release 2023, 360 , 591–612. [Google Scholar] [CrossRef]
  142. Narayanan, K.; Bhaskar, R.; Han, S. Recent Advances in the Biomedical Applications of Functionalized Nanogels. Pharmaceutics 2022, 14 , 2832. [Google Scholar] [CrossRef]
  143. Khongkhunthian, S.; Sastraruji, T.; Klayraung, S.; Okonogi, S. Efficacy of Anesthetic Rice Nanogel on Pain Reduction in Human Oral Cavity. Drug Discov. Ther. 2018, 12 , 31–36. [Google Scholar] [CrossRef] [PubMed]
  144. Qiao, Y. Gold-Silver-Cuprous Oxide (Au-Ag-Cu2O) Composite Nanogel Combined with Photothermal Therapy in the Treatment of Severe Drug-Resistant Microbial Keratitis. ClinicalTrials.Gov Identifier: NCT05268718. Updated 7 March 2022. Available online: https://clinicaltrials.gov/study/NCT05268718 (accessed on 29 July 2024).
  145. Omar, S.I. Periocular Rejuvenation by Topical Hyaluronic Acid Nano Particles. ClinicalTrials.Gov Identifier: NCT05742399. Updated 19 July 2023. Available online: https://clinicaltrials.gov/study/NCT05742399 (accessed on 29 July 2024).
  146. Todaro, B.; Ottalagana, E.; Luin, S.; Santi, M. Targeting Peptides: The New Generation of Targeted Drug Delivery Systems. Pharmaceutics 2023, 15 , 1648. [Google Scholar] [CrossRef] [PubMed]
  147. Rosa, E.; Diaferia, C.; Gallo, E.; Morelli, G.; Accardo, A. Stable Formulations of Peptide-Based Nanogels. Molecules 2020, 25 , 3455. [Google Scholar] [CrossRef] [PubMed]
  148. Neamtu, I.; Ghilan, A.; Rusu, A.G.; Nita, L.E.; Chiriac, V.M.; Chiriac, A.P. Design and Applications of Polymer-like Peptides in Biomedical Nanogels. Expert Opin. Drug Deliv. 2024, 21 , 713–734. [Google Scholar] [CrossRef] [PubMed]